Bedienungsanleitung Apc nbwl0455 (Seite 88 von 135) (Englisch)

294082

Zoom out

Zoom in

Vorherige Seite

1/135

Nächste Seite

80NetBotz Appliance User’s Guide

Data to FTP Server notification method. If too many notifications are delayed, some will not be

sent.

• Sensor Data Fails to Load: If the appliance is transmitting a large amount of data, attempts to

load sensor data may fail. Once the load on the appliance is reduced, the sensor data re-appears.

Using SIM security

If your SIM requires a PIN and you enter the PIN incorrectly, the SIM can become blocked. If your SIM

is blocked, you will require a Pin Unblocking Key (PUK) from your service provider.

Note: If the SIM is disabled and the appliance continues to use the SIM with an incorrect

PIN, the SIM may become permanently disabled.

Upgrading over PPP

Depending on connection speed, this process can take more than 90 minutes including an appliance

reboot. If your PPP connection fails before the upgrade download is complete, the upgrade must be

re-initiated once the PPP connection is re-established. Configure your appliance dial-out or dial-in

schedule to allow at least 90 minutes from the time you start the upgrade process.

Upgrading over a dial-out connection. Before beginning the Upgrade process, ensure that the

dial-out schedule is set to establish PPP connections for at least a 90 minute period from the time you

begin the upgrade.

Once the upgrade image is downloaded and applied to the appliance, the appliance automatically

reboots. When this happens, Advanced View displays an Attempting to Re-Connect status window.

Click Cancel, wait about five minutes to allow the appliance to finish upgrading, rebooting, and

re-establishing the PPP network connection, and use Advanced View to reconnect with the appliance.

Once reconnected, use the Upgrade icon to confirm that the upgrade was successful.

Upgrading over a dial-in connection. Before beginning the Upgrade process, set the dial-in schedule

to permit dial-in PPP connections for at least 90 minutes from the time you begin the upgrade. Disable

all dial-out configuration since dial-out always overrides dial-in. If the appliance needs to dial-out during

the upgrade process due to an alert or other notification event, the dial-in session is terminated

immediately without warning.

Once the upgrade image is downloaded and applied to the appliance, the appliance automatically

reboots. Once the appliance reboots, the dial-in connection closes and Advanced View appears to halt

Attempting to Re-Connect status window. Click Cancel in the Status window, wait about five minutes

to permit the appliance to finish upgrading and rebooting, and re-establish the dial-in connection to the

appliance. Once reconnected, use the Upgrade icon to confirm that the upgrade was successful.

If you are upgrading both BotzWare and Advanced View simultaneously, once you click Cancel in the

Attempting to Re-Connect status window, the Advanced View upgrade begins automatically. Once it

has finished, re-start Advanced View and proceed with the upgrade instructions above.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Apc nbwl0455 Seite 88

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info