Bedienungsanleitung Apine DHA-S690 (Seite 23 von 46) (Englisch)

471451

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

21-EN

ALPINE DHA-S690 68-09359Z17-A (EN)

16:9 (WIDE)

Select this when

connected to a wide

screen TV.

4:3 LB (LETTER BOX)

Select this when connected to a

conventional 4:3 size (normal TV

aspect ratio) monitor. There may

be black bands visible at the top

and bottom of the screen (when

playing a 16:9 size movie). The

width of these stripes will depend

upon the original aspect ratio of the theatre release of the

movie.

4:3 PAN (PAN SCAN)

Select this when

connected to a

conventional 4:3 size

monitor. The picture will fill

the entire TV screen.

However, due to the

mismatch in aspect ratio,

parts of the movie at the extreme left and right sides will not

be visible (when playing a 16:9 size movie).

Playing back a Main Story directly

This function skips warnings, precautions, etc., initially displayed

when you play back a DVD, and goes straight to the main Story.

Setting item: MAIN STORY

Setting content: OFF (Initial setting) / ON

If you want to play back the main Story directly, set to ON.

• The function may not be available depending on the disc.

Selecting the Button on the Image Screen automatically

You can automatically select the buttons displayed on the top menu/

menu image screen by setting time (seconds) without setting

manually.

Setting item: AUTO DVD MENU

Setting content: OFF (Initial setting) / SET TIME (1~15 sec)

SET TIME: Set your desired duration (1 to 15 seconds) using

the numeric keypad. After the set time has

passed, the buttons are automatically selected.

(For example, if 8 seconds is set, press 8, and

then press ENT.)

SYSTEM SETUP

•When settings are changed, old settings are overwritten. Make a

note of the current settings before making changes. The settings are

not cleared even when the vehicle’s battery is disconnected.

Switching the Background Colour

You can select the background colours from 2 types preset or colour 4

types.

Setting item: BACK PICTURE

Setting contents: TYPE-1

(Initial setting) / TYPE-2 / COLOR

∗

COLOR → BLACK / GRAY / BLUE / GREEN

Setting the TV Screen

Use the procedure described below to set the output screen according

to the type of TV monitor being used.

Setting items: TV SCREEN

→

ASPECT

Setting contents: 16:9 (WIDE) (Initial setting) / 4:3 (LETTER

BOX) / 4:3 (PAN SCAN)

•For some discs, the picture may not be set to the selected screen

size. (For details, refer to the explanation on the disc’s jacket.)

•Pressing RETURN will return to the previous screen.

Setting the TV System

You can select the output playback method of an NTSC or PAL signal

disc.

Setting items: TV SCREEN

→

TV SYSTEM

Setting content : MANUAL / AUTO CHANGE (Initial setting) /

AUTO SELECT

MANUAL: If a playback disc signal differs from the

signal system on the connected monitor,

“VIDEO SIGNAL SYSTEM IS NOT

CORRECT” is displayed.

AUTO CHANGE:

Image is output by converting the played

back disc to the signal system of the monitor.

AUTO SELECT: Outputs an image according to the disc

signal to be played back.

(only when both an NTSC/PAL compatible

monitor is connected.)

* After you have changed the setting from AUTO CHANGE to

MANUAL or to AUTO SELECT, or from MANUAL or AUTO

SELECT to AUTO CHANGE, turn off the DHA-S690 power. Then

when you turn on the power next time, the setting is carried out.

When the DHA-S690 power is turned off and on again, perform the

following operation.

• If Ai-NET is not connected: turn off PWR on the remote control

and then turn it on again.

• If Ai-NET is connected: turn off the connected head unit power

and then turn it on again, or change the source.

• If you set to AUTO CHANGE, the image may show some

deterioration compared to the original.

Setting the Disc Change

When the DVD disc main story playback is finished, the disc will

automatically change to the next main story disc.

Setting item: AUTO DISC CHANGE

Setting contents: OFF (Initial setting) / ON

• The function may not be available depending on the disc.

Delaying Image Output

Use this function when an external audio processor is connected.

Depending on the connected audio processor, the audio and image

currently played back may not be output at the same time. In this

case, you can output an image delayed by 0.1 second by setting to

ON.

Setting item:

VIDEO DELAY

Setting contents: OFF (Initial setting) / ON

ON: Output image is delayed by 0.1 second.

• If a disc with a high compression rate is played back, the image

and audio may be distorted.

Setting the Connected Head Unit

The setting is made to output audio from the connected Ai-NET

compatible head unit.

Setting item: MODEL SETUP

Setting contents: DVD CHG (Initial setting) / CD CHG

DVD CHG: Set when a head unit sold after January 2008 is

connected.

*Even if the head unit is sold after January 2008, “CD CHG” may

or may not be set. Refer to the Owner’s Manual of the connected

head unit as to whether “CD CHG” or “DVD CHG” should be

set.

CD CHG: Set when a head unit sold earlier than December

2007 is connected.

After the setting is complete, turn the ignition key off and on again.

• If this setting is switched, you should reset. Refer to “Initial System

Start-Up” (page 9).

•To recall the IVA-D105R, etc. image, switch the VISUAL button on

the IVA-D105R.

•Depending on the connected Ai-NET compatible head unit, even

though an Ai-NET is set to CD CHG, available functions or

displays may vary.

Apine DHA-S690 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info