╞
w.conrad.com
Apotop “Wi-Reader Pro”
WiFi Card Reader
V 07/13
D-92240 Hirschau (www.conrad.com).
fi lming,
or the capture in electronic data processing systems require the prior written approval by the editor.
Reprinting, also in part, is prohibited.
technology and equipment reserved.
© Copyright 2013 by Conrad Electronic SE.
Intended use
The product is used as WLAN Hotspot, as a mobile storage solution via USB stick or SD memory card for
iOS and
from a notebook or PC), as well as a mobile charging station for tablets or mobile phones.
The inbuilt rechargeable battery enables independent operation and use. Charging takes place, for example,
via a USB port of a computer or a USB hub with individual power supply or via a power supply with USB
socket (e.g. the power supply unit of an iPad or
The safety instructions must be observed at all times!
Any use other than that described above could lead to damage to this product and involves the risk of short
circuits, fi re, electric shock, etc. No part of the product may be modifi ed or converted!
This product complies with the applicable national and European requirements.
products are the trademarks of the respective owners.
Package content
• Apotop “Wi-Reader Pro ”
• USB
• Quick
• Manufacturer's operation instructions (in English)
Safety Instructions
instructions! We do not assume any liability for any resulting damage!
handling or non-compliance with the safety instructions! In such cases, the warranty will
be null and void.
• fi cation of the product is not permitted for safety and
approval reasons (CE). Never dismantle the product.
• The product is not a toy and should be kept out of the reach of children.
•
Protect the product against cold, heat, dust, dirt and direct sunlight.
•
ous plaything for children.
•
from a low height.
Connection and Getting Started
Charging the rechargeable battery
•
end, connect the “Wi-Reader Pro” to a USB port of a computer
or directly to a power supply with USB port (e.g. the power supply of the iPad or the
the USB cable provided.
•
takes approx. 6 hours (USB port with 500 mA) or 4 hours (USB power supply unit with 1000 mA). Of course,
you can still use the product during the charging process. However
Using the product as mobile storage with iOS or Android devices
•
the “Wi Reader Pro” to your router using an RJ45 network cable, see “Operating the product as a Hotspot”.
The
•
” position. The start of the WLAN Hotspot in the “Wi Reader
Pro” takes approx. 30-35 seconds. Wait until the blue LED fl ashes.
• fi nd
the WLAN of the “Wi Reader Pro”. The SSID is “Wi Reader Pro_xxxxxx” (the letters “x” at the end stand
for a random serial number
setting; the access to the internet is immediately possible.
Pro” or the internet without any confi guration work (connect the RJ45 cable, see “operating the
product as Hotspot”). Of course you can set an encryption (e.g. WP
“Wi Reader Pro”.
•
It is not possible to use both memory types at the same time.
•
card, download images onto the tablet or the telephone or save images onto the USB stick or the SD
memory card.
those images printed via one of the photo printers available in many places.
Operating the product as WLAN Hotspot
•
using a 1:1 connected network cable.
desk of the hotel.
•
” position. The start of the WLAN Hotspot in the “Wi Reader
Pro” takes approx. 30-35 seconds. Wait until the blue LED fl ashes.
• fi nd
the WLAN of the “Wi Reader Pro”. The SSID is “Wi Reader Pro_xxxxxx” (the letters “x” at the end stand for
a random serial number
•
the access to the internet is possible immediately
without any confi guration work. Of course you can set an encryption (e.g. WP
menu of the “Wi Reader Pro”.
Operating the product as a mobile charging station
Put the sliding switch on the side in the “
” position. The “Wi Reader Pro” now can be used as charging
station, e.g. for a mobile telephone. The charging current can reach a maximum of 1
Tips and Notes
Please consult the provided manufacturer's extensive (English) instruction manual.
•
button. In order to reset the “Wi Reader Pro”, the latter has to be switched on. If you press and hold the
push-button for approx. 3 seconds (e.g. using a paper clip), all settings will be lost and the “Wi Reader Pro”
will be in its original delivery state again.
Pro” is operational again.
•
• The “Wi Reader Pro” has its own webserver for the confi guration.
device has to be connected to the WLAN of the “Wi Reader Pro” (SSID e.g. “Wi Reader Pro_xxxxxx”).
Enter the following IP address: http://10.10.1.1 into the address line of your browser
fi eld “Settings” at the top right. Here, you can
enable an encryption and also confi gure the WLAN Hotspot as a router
•
Pro_xxxxxx”), enter the IP address http://10.10.1.1 in the address line of your browser
Reader” that appears on the left edge of the screen and directly access the USB stick (or the SD memory
card).
Maintenance and Care
Prior to cleaning the product, switch the product off.
Use a clean, dry
ouration. Do not press too strongly on the surface when cleaning, to prevent scratch marks.
Dust can easily be removed using a clean, long-haired brush and a vacuum cleaner
Disposal
requirements.
Declaration of Conformity (DOC)
We, Conrad Electronic, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declare that this product
conforms to the fundamental requirements and the other relevant regulations of the directive 1999/5/EC.
The Declaration of Conformity for this product can be found at www
T
Operating voltage 5 V/DC
Power input
Integrated rechargeable battery
WLAN ............................................... 802.1
SSID “Wi Reader Pro_xxxxxx” (the last digits stand for a serial number)
LAN-Port
Dimensions
Weight
