Bedienungsanleitung Aquadon Smart Heater M20411 (Seite 8 von 32) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch, Türkisch)

783934

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

lever to water ﬂow, and turn the spout/hose left and

right. Make sure the connection is tight, and ﬁx any leaks

before use.

g. Connect the water heater plug to the power supply.

2. With power connection below the sink (ill. 4). Important!

Please ensure that the opening in the worktop or sink is

large enough for the plug. If you are unable to ﬁt the plug

into the hole, please contact a specialist.

a. Place the spacer ring (8) with the crown facing upwards

into the lower part of the main unit (2). Make sure that

the cable is placed in the recess provided.

b. Place the rubber sealing ring (3) underneath the spacer

ring (8). Thread the power cable and the thread of

the continuous ﬂow heater into the hole of the rubber

sealing ring (3).

c. Insert the thread of the continuous ﬂow heater and

the power cable through the opening provided on the

sink or worktop (4). If you are unable to ﬁt the plug into

the hole, please contact a specialist. When you ﬁrst

create the opening for attaching the ﬁtting, make sure

that it is no larger or smaller than 4 cm. Depending on

the thickness of the countertop, the ﬁtting can still be

attached with a diameter of 4 cm and the Aquadon plug

can be inserted through the opening.

d. From below, place the cable guide ring (5) (with the

cable recess facing upwards) onto the thread of the

main unit (2). To ﬁx, screw in the fastening nut (6).

e. Screw the ﬂexible hose to the thread of the continuous

ﬂow heater and to the water outlet on the wall.

f. Open the water supply, set the continuous ﬂow heater

lever to water ﬂow, and turn the spout/hose left and

right. Make sure the connection is tight, and ﬁx any leaks

before use.

g. Connect the water heater plug to the power supply.

NOTE: First connect the water. If all seals are tight, the

device can be connected to the power.

Setting the water temperature (ill. 5):

Depending on the position of the lever, you can choose

between ‚cold‘, ‚warm‘ and ‚oﬀ‘ ranges. If the lever is turned

down, the ﬂow for cold water will increase; turn the lever

upwards and the ﬂow for hot water increases. With an

increase in the ﬂow rate in the warm water range, the water

temperature drops. If the device is operated in the hot

water range, you will see the current water temperature on

the display.

NOTE: To conserve power, there is a regulator in the unit

that ensures that electricity is only consumed during the

use of hot water. Connecting and disconnecting the device

is therefore not necessary.

CLEANING AND MAINTENANCE

Cleaning the water outlet (ill.6):

When water ﬂow becomes less consistent or weaker, the

water outlet needs cleaning. Proceed as follows: Unscrew

the water outlet in an anti-clockwise direction and descale

or replace as necessary. Then reattach the water outlet.

Cleaning of water ﬁlter (ill. 7):

If cleaning the water outlet does not produce the desired

eﬀect, remove the water ﬁlter at the water inlet, situated

at the bottom of the thread from the main unit (2), clean it,

and then reinstall it.

SPECIFICATIONS:

Power (kw): 3

Water pressure (Mpa): 0,04 – 0,6

Waterprooﬁng Grade: IPX4

Rated voltage: 220 – 240V ~ 50/60 Hz

Daily electricity consumption Qelec: 0.374 kWh

Load proﬁle: 3XS

Water heating energy eﬃciency nwh: 37.6%

This product complies with the European directives.

Do not dispose this product at the end of its service

life through normal domestic waste. It has to be

disposed through a collection agency that recycles

electric and electronic devices. This is pointed out by the

symbol on the product, in the instruction manual, and

on the packaging. Please inquire about local collection

agencies that may be operated by your distributor or your

municipal administration. By recycling, making use of

the materials, or other forms of recycling old units you

are making an important contribution to protecting our

environment.

Food-safe

Protection class 1

Made in China

CONSIGNES DE SÉCURITÉ

• Lisez la notice avant utilisation et conservez-

la en lieu sûr pour toute référence future.

• Le robinet doit être ouvert et l‘appareil

doit être raccordé à une source de courant

électrique.

• Cet appareil doit être installé en position

verticale. Toute autre position est interdite.

• Aﬁn d‘éviter une surchage du circuit

M20411_Aquadon_Manual_20210512_MM.indd 8M20411_Aquadon_Manual_20210512_MM.indd 8 12.05.21 17:3212.05.21 17:32

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aquadon Smart Heater M20411 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info