Bedienungsanleitung Arcam A18 (Seite 10 von 14) (Englisch)

578743

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

E-10

Switching on

e front panel POWER button switches the unit on and

o.

e power light (next to the ‘A18 Integrated Amplier’

text) indicates the state of the amplier. e power LED

is green and ON if the power is connected and the unit

is turned ON.

Display

e front panel DISPLAY button (or DISP on the remote

control) changes the display brightness between ‘on’,

‘dimmed’ and ‘o’. If the A18 is powered o with the

display brightness set to ‘o’, the display resumes to

‘dimmed’ when the unit is powered on again.

Selecting an audio source

e audio source may be selected from the front panel

(PHONO, AUX, CD, TUNER, SAT, DVD, PVR or AV), or the

remote control (DVD, SAT, AV, TUN, AUX, PVR, CD or PHO).

In each case, the source is selected from the input

sockets with the corresponding name.

Listening

Listening using speakers

Use the control knob to change the volume. Turn the

knob clockwise to increase the volume, anti-clockwise

to reduce it.

Listening using headphones

e headphones socket (PHONES) accepts headphones

with an impedance rating between 8Ω and 2kΩ, tted

with a 3.5mm stereo jack plug.

e pre-amp outputs and speakers are muted when

headphones are plugged in. e headphones socket is

always active, unless output has been muted.

Muting output

e output of the A18 can be silenced by pressing MUTE

on the front panel (or

on the remote control). Press

MUTE/

for a second time (or change the volume) to

cancel mute.

operation



















AUX 31

    





Adjusting listening settings

e A18 allows you to customise the balance, bass

and treble levels of the amplier to t your system.

Adjustments can be made either on the front panel or by

using the CR10 remote control. Click the corresponding

button to view the current setting, then use the control

knob on the front panel (or VOL +/ buttons on the

CR10) to adjust.

Balance

is setting allows you to increase the volume of one

channel (le or right) relative to the other. Altering

the balance (from L9 to R9, via the neutral value 0)

may help to restore the stereo image for an o-centre

listening position.

Bass

is setting allows you to increase or decrease the level

of low frequency elements in the sound within the range

+7 to -7.

Treble

is setting allows you to increase or decrease the level

of high frequency elements in the sound within the

range +7 to -7.

Direct mode

is is a ‘tone defeat’ setting which ignores any Bass and

Treble trim values.

Press

DRCT (Direct) on the remote control to toggle this

setting; ‘DIRECT’ is lit on the display when Direct mode

is active.

Processor mode

e A18, in combination with a power amplier, can

be used to drive the front le and right speakers of a

surround-sound system, when fed from a multi-channel

processor. e volume of the entire system may then be

controlled using the processor.

While in Processor mode, you can feed the sound from

the processor into

AV IN and set the ‘Proc mode volume’

of the A18 to match the ampliers that drive your

other loudspeakers. Set this ‘Proc mode volume’ using

the VOL+ and VOL buttons on the remote. e last set

value of ‘Proc mode volume’ is remembered whenever

Processor mode is selected.

Processor mode may be toggled on and o (when

AV is selected as the source) by using the front panel

PROCESSOR MODE button or PROC on the remote. ‘PROC’

remains lit on the display while Processor mode is

active.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Arcam A18 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Arcam A18

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info