Bedienungsanleitung Arcam A38 (Seite 9 von 76) (Deutsch, Englisch, Holländisch, Französisch)

578745

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

E-7

English

Audio inputs

Although the inputs are labelled for specic devices, all

have the same characteristics and each may be used with

any line-level product. e exception is the optional

Phono input (see page 16 for specication).

DVD

Intended for the analogue outputs from a DVD-player.

Intended for the analogue outputs from general audio-

visual equipment, such as a VCR, digital TV/satellite

receiver, or Nicam tuner.

TUNER

Intended for the analogue outputs from a radio tuner.

Intended for the analogue outputs from a CD player.

AUX

is is intended for general use. Connect the analogue

audio outputs of any unit with a line-level output (such

as a games console or set-top box).

Recording loops

e A38 is equipped with two recording loops, for use

with recording devices (such as cassette decks, CD

recorders, DAT recorders, VCR, PVR etc.).

AV RECORD OUT

Connect these output sockets to the input sockets of

your recording device (usually labelled RECORD or IN).

AV PLAY IN

Connect the output sockets of your recording device

(usually labelled P LAY or OUT) to these inputs.

If you do not have a recording device, you can use this

input for other (line-level) equipment, such as a TV,

DVD, CD-player, radio tuner, PVR, etc.

PVR RECORD OUT

ese output sockets can be connected to the input

sockets of a second recording device.

PVR PLAY IN

Connect the output sockets of your second recording

device to these inputs. Alternatively, this input may be

used for other (line-level) equipment such as a games

console, set-top box, etc.

AV Dubbing

You can perform tape dubbing from PVR to AV, but not

from AV to PVR.

For example, to copy from a cassette recorder connected

to the PVR socket, to a cassette recorder connected to the

AV socket, rst use the RECORD button to select ‘Record

PVR’. is routes the PVR signal to the AV output.

Phono input

As standard, no phono input is tted to the A38.

e phono module (or an external phono amplier) is

required if you wish to connect a record player to the

A38. is is because the low-voltage output of a record

player requires a pre-amplication stage before the signal

can be used.

A very high quality phono input is available as an optional

extra: please consult your dealer for price and availability.

e Arcam phono module is compatible with moving-

magnet cartridges (MM) and moving-coil cartridges

(MC). Once the module is tted, you should select MM

or MC via the recessed MM/MC back panel switch (push

the switch in for MC).

If you have already an external phono amplier that you

wish to use, connect this to one of the line-level inputs,

such as the AUX input.

Controlling A38 from a second room

e A38 will require a remote pick-up device with a 12V external power supply

(such as a Xantech Dinky Link) located in Zone 2, together with a power amplier

(such as an Arcam A38 or P38) to complete the system.

e diagram below shows the wiring scheme, which will also apply to other IR

pick-up devices commonly available.

e A38 can also provide a +12V trigger output to control devices such as the

power amplier in Zone 2. e +12V trigger is active when the unit is ‘On’.









Signal

Tip = Signal

REMOTE IN

Dinky Link, located in Zone 2

Sleeve = 0V

Pre-/power-amplifier connections

PRE OUT

To use your A38 as a dedicated pre-amplier, or as part

of a bi-amp’ed system, connect the PRE OUT sockets to

the input sockets of your power amplier.

PWR IN

To use your A38 as a power-amplier, connect the

output of your pre-amplier to the PWR IN sockets.

If you wish to use your A38 as a dedicated pre- or

power-amplier (but not in the case of a bi-amp’ed

system), press the PRE/PWR switch in on the rear panel.

is separates internally the connection between the

pre- and power-amp. stages of the A38.

When used as a power amplier, your A38 has exactly

the same specication and performance as a P38,

described later in this handbook.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Arcam A38 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info