578723

Arcam A49 Seite 5

5
Zoom out
Zoom in
Vorherige Seite
1/107
Nächste Seite
E-5E-4
English
contents
Placing the unit
< Place the amplier on a level, rm surface, avoiding
direct sunlight and sources of heat or damp.
< Do not place the A49/C49/P49/P349 on top of a
power amplier or other source of heat.
< Do not place the amplier in an enclosed space
such as a bookcase or closed cabinet unless there is
good provision for ventilation. e A49/P49/P349
are designed to run warm during normal operation.
< Do not place any other component or item on top
of the amplier as this may obstruct airow around
the heat-sink, causing the amplier to run hot. (e
unit placed on top of the amplier would become
hot, too.)
< Make sure the remote-control receiver to the right
of the front panel display is unobstructed, otherwise
this will impair the use of the remote-control.
< Do not place your record deck on top of this
unit. Record decks are very sensitive to the noise
generated by mains power supplies which will be
heard as a background ‘hum’ if the record deck is
too close.
< e normal function of the unit may be disturbed
by strong electromagnetic interference. If this
occurs, simply reset the unit with the power button,
or move the unit to another location.
Power
e amplier is supplied with a moulded mains plug
already tted to the lead. Check that the plug supplied
ts your supply – should you require a new mains lead,
please contact your Arcam dealer.
If your mains supply voltage or mains plug is dierent,
please contact your Arcam dealer immediately
Push the IEC plug end of the power cable into the
socket on the back of the amplier, making sure that it
is pushed in rmly. Plug the other end of the cable into
your mains socket and, if necessary, switch the socket
on.
Interconnect cables
We recommend the use of high-quality screened cables
that are designed for the particular application. Other
cables will have dierent impedance characteristics
that will degrade the performance of your system (for
example, do not use cabling intended for video use to
carry audio signals). All cables should be kept as short as
is practically possible.
It is good practice when connecting your equipment to
make sure that the mains power-supply cabling is kept
as far away as possible from your audio cables. Failure
to do so may result in unwanted noise in the audio
signals.
Arcam’s A49 integrated, C49 pre-amplier and P49/
P349 power ampliers provide class leading sound
quality for the best possible reproduction of your music.
Drawing on the many years of amplier design
experience at Arcam, all three products use the best
quality components and engineering practice to
produce a product that will give many years of musical
pleasure and reliable service.
With a class G amplier, toroidal based power supply,
acoustically damped chassis, parallel transistor output
stages and exceptionally low levels of distortion and
noise both the a A49, P49 and P349 are capable of
reproducing music with all its original authority and
detail. Both the A49 and C49 feature dual mono volume
controls and a balanced signal path all the way though
the product. Rest assured you will be hearing the music
just as the artist intended.
e A49, C49, P49 and P349 are designed to produce
a level of performance that will truly bring music to
life.
PHONO 20
PHONO AUX CD TUNER SAT
MUTE
DISPLAY
BALANCE
BD PVR AV SP1 SP2 PHONES
POWER
POWER / STANDBY
overview
Contents
safety guidelines ...................................................................................................................................E-2
Important safety instructions ....................................................................................................................................................... E-2
Safety compliance ............................................................................................................................................................................E-2
welcome… ............................................................................................................................................. E-3
overview ................................................................................................................................................. E-5
Placing the unit .................................................................................................................................................................................E-5
Power .....................................................................................................................................................................................................E-5
Interconnect cables .......................................................................................................................................................................... E-5
A49 connections ...................................................................................................................................E-6
C49 connections ....................................................................................................................................E-7
P49 connections ....................................................................................................................................E-8
P349 connections .................................................................................................................................E-9
A49/C49 operation .............................................................................................................................E-10
Switching on .................................................................................................................................................................................... E-10
Selecting an audio source .......................................................................................................................................................... E-10
Audio inputs ..................................................................................................................................................................................... E-10
Phono input ...................................................................................................................................................................................... E-10
Connecting to a source component with a balanced output ..................................................................................... E-11
Processor mode .............................................................................................................................................................................. E-11
Connecting to an additional power amplier .................................................................................................................... E-11
Recording an audio source ........................................................................................................................................................ E-11
Adjusting the balance .................................................................................................................................................................. E-11
Speaker Control .............................................................................................................................................................................. E-11
Listening ............................................................................................................................................................................................ E-11
P49/P349 operation ...........................................................................................................................E-12
Switching on .................................................................................................................................................................................... E-12
SP1 and SP2 ...................................................................................................................................................................................... E-12
CR902 remote control ........................................................................................................................ E-13
Alternative code selection .......................................................................................................................................................... E-13
AMP Device Mode ......................................................................................................................................................................... E-14
TUN Device Mode .......................................................................................................................................................................... E-14
CD Device Mode ............................................................................................................................................................................. E-14
BD Device Mode ............................................................................................................................................................................. E-14
loudspeakers .......................................................................................................................................E-15
Connecting loudspeakers ........................................................................................................................................................... E-15
Normal single wiring..................................................................................................................................................................... E-15
Bi-wiring ............................................................................................................................................................................................. E-15
Bi-amping .......................................................................................................................................................................................... E-16
Bridged mode .................................................................................................................................................................................. E-17
Dual mono ........................................................................................................................................................................................ E-18
troubleshooting .................................................................................................................................. E-19
A49 specications ............................................................................................................................... E-20
C49 specications ...............................................................................................................................E-21
P49 specications ...............................................................................................................................E-22
P349 specications ............................................................................................................................. E-23
product guarantee .............................................................................................................................E-24
… 5 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Arcam A49 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info