482343
41
Zoom out
Zoom in
Vorherige Seite
1/74
Nächste Seite
E-39
English
video
& audio
connection
settings
Each input on the AVR500/AVR600/AV888 has multiple
connection possibilities for both audio and video,
including HDMI, Component Video, digital audio and
analogue audio. When an input is selected, by default
the AVR500/AVR600/AV888 will select HDMI for both
video and audio connections.
Set the Audio Source and Video Source to the
connection type you are using: HDMI, Component,
S-Video or Composite for video and HDMI, Digital or
Analogue for audio.
Select the type of audio: HDMI, Digital or Analogue
Video Source
Colour
Picture Mode
Edge Enhancement
Mosquito NR
Noise Reduction
Block NR
Component Mode
Audio Source
Input Config
General Setup
Spkr Types
Spkr Distance
Spkr Levels
Video Inputs
Video Outputs
Mode
Zone Settings
Network
Auto Setup
>
HDMI
Digital
Analogue
Select the type of video: HDMI, Component, S-Video
or Composite
Video Source
Colour
Picture Mode
Edge Enhancement
Mosquito NR
Noise Reduction
Block NR
Component Mode
Audio Source
Input Config
General Setup
Spkr Types
Spkr Distance
Spkr Levels
Video Inputs
Video Outputs
Mode
Zone Settings
Network
Auto Setup
>
HDMI
Component
S-Video
Composite
Entering Setup mode
Before entering the menu, select the input that you wish
to change (e.g. DVD). To enter the setup menu, press the
AMP button followed by the MENU button on the remote
control. e front panel display shows ‘MENU’ and the
setup menu (pictured right) is displayed. Press the
remote control
E
key to enter the Input Cong menu
then use the
C
key to navigate down to the Video
Source option.
Selecting the video source
Once the Video Source option is highlighted as shown,
press the OK key to select it for modication. Use the
B
and
C
keys to select from the list the video type
you are using on this source.
<
HDMI: the unit is forced to use the HDMI video
input for this source.
<
Component: the unit is forced to use the
Component/RGB video input for this source.
<
S-Video: the unit is forced to use the S-Video input
for this source.
<
Composite: the unit is forced to use the Composite
video input for this source.
Selecting the audio source
Highlight the Audio Source as shown and press the OK
key to select it for modication. Use the
B
and
C
keys to select from the list the audio type you are using
on this source. NOTE: you may experience some audio
transients when changing this setting. As a precaution,
we recommend that you reduce the volume level rst.
<
HDMI: the unit is forced to use the HDMI audio
input for this source.
<
Digital: the unit is forced to use the optical (TOSLINK)
or coaxial (S/PDIF) digital audio input for this source
<
Analogue: the unit is forced to use the analogue
audio input for this source.
41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Arcam AV888 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Arcam AV888

Arcam AV888 Bedienungsanleitung - Deutsch, Holländisch - 200 seiten

Arcam AV888 Bedienungsanleitung - Holländisch - 72 seiten

Arcam AV888 Bedienungsanleitung - Französisch - 200 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info