Bedienungsanleitung Arcam AV888 (Seite 60 von 74) (Englisch)

482343

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

E-58

Mode Mover

If your home entertainment setup contains devices of

the same type (e.g. two TVs, perhaps from dierent

manufacturers) you can still control both those devices

with the CR102. You simply need to reassign an unused

Device Mode key.

NOTE

Before using Mode Mover, make sure both the

source and destination Device Mode keys are

unlocked (see next section).

Example: To use the

key to control a

second TV

1. Press and hold

until the power LED blinks twice:

3. Press

3. Press the Device Mode key for the type of device you

want to control (e.g. for a TV, press

4. Press the Device Mode key you want to use (e.g.

5. Don’t forget to set up the CR102 to control the

second device, using one of the methods on page 25.

Note that volume punch-through is not applied to a

Device Mode that has been copied using Mode Mover.

However, volume punch-through functionality can be

restored when you have used Mode Mover, by copying

and

from the AMP Device Mode to the

same physical buttons on the new moved Device Mode

using the last example shown in Key Mover.

To restore a moved Device Mode key to its

original state

1. Press and hold

until the power LED blinks twice:

2. Press

3. Press the Device Mode key you want to restore

twice.

Locking/Unlocking a specific

Device Mode

When you rst unpack your CR102 and insert the

batteries, for your convenience it is able to control

certain Arcam components automatically (e.g. DVD

players, Ampliers, Tuners and CD Players). We achieve

this by preprogramming specic Arcam device codes

onto the relevant Device Mode keys, then locking

the Device Modes so you don’t reprogram them

inadvertently.

If you want to override these locked default settings – to

control a third-party DVD player, for example – you will

rst need to unlock DVD Mode before setting up the

CR102 using one of the methods described at the start

of this guide.

Here are the factory default settings:

Device Mode Default status Default Arcam

codes

DVD

Locked 0762

SAT

Unlocked 1205

Unlocked 0586

TUN

Locked 2009

AMP

Locked 1242

PVR

Unlocked 1930

VCR

Unlocked 0111

Locked 2010

Alternative codes are available for multi-room solutions,

or in the case of code clashes with other manufacturer’s

products.

For example:

DVD (system code 12) 1655

AMP (system code 19) 1954

You will need to change the system code on the product

you wish to control, as well as the CR102.

NOTE

e

AMP Device Mode can only be used to control

Arcam ampliers like the AVR500, AVR600 and

AV888, either on its default or alternative IR system

codes.

To toggle a Device Mode lock setting:

1. Press the Device Mode key you want to unlock (e.g.

)

2. Press and hold

until the power LED blinks twice:

3. Press

e power LED blinks twice when being locked, and

blinks four times when being unlocked.

If you enter an invalid key sequence, the power

LED gives one long blink and returns to normal

operation.

While the Device Mode key is locked, the Direct Code

Setup and Move Mode functions are not available.

Copy a key between Device Modes

It is possible to copy functions between Device Modes.

However, remember that button functions are Device

Mode specic and therefore eectively ‘punch-through’

to the original Device Mode when copied over.

e following example copies the AVR500/AVR600/

AV888

DIRECT function from the CR102 AMP device

mode to the shied function of the

button on AV

Device Mode.

1. Press and hold

until the power LED blinks twice:

2. Press

3. Press the Device Mode key of the function you want

to move (e.g.

4. Press the function key you want to move (e.g.

)

DIRECT)

5. Press the key of the Device Mode you want to copy

the function to (e.g.

)

6. Press the

button graphic

7. Press the key you want to copy the function to (e.g.

)

If you prefer to copy the key to the main function of the

button instead of the ‘shied’ function, omit point 6

in the above example.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Arcam AV888 Seite 60

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Arcam AV888

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info