Bedienungsanleitung Arcam AVR400 (Seite 22 von 236) (Deutsch, Englisch, Holländisch, Französisch)

578747

Zoom out

Zoom in

Vorherige Seite

1/236

Nächste Seite

E-20

Operating your AVR400

For information display we recommend you use the

OSD (On-Screen Display) on your display device

whenever possible.

Switching on

Press the front panel power button in. e power

LED will glow green, the front display shows the word

‘ARCAM’. When initialisation is complete, the display

shows the volume setting and the name of the selected

input.

Please wait until the unit has nished initialising before

operating the AVR400. It is recommended that if the

unit is switched o, you should wait at least 10 seconds

before switching the unit back on.

Standby

e AVR400 has a standby mode which can be entered

by pressing STANDBY on the remote control. When in

standby mode, the display is blank and the POWER LED

glows red.

If the unit is to be le unused for an extended period,

we recommend that you disconnect it from the mains

supply to save power.

To switch on from standby

Press the STANDBY button on the remote control or any

key on the front panel (other than the power button).

Front panel display

e AVR400 is ready for use aer about four seconds.

B D 3 7

D O L B Y T R U E H D 5 . 1

e display window shows the currently selected source

and the last selected information view setting (this

information line can be changed using the INFO button).

e current volume setting for Zone 1 (37.0dB in the

above example) is displayed on the front panel. e

volume setting for Zone 2 is displayed temporarily

whenever it is adjusted.

operation

Selecting a source

To select a particular source, press the –INPUT or

INPUT + buttons until that source is shown on the front

panel display, or (if available) press the corresponding

source button on the remote. e following sources are

available:

Compact Disc player input

Blu-ray Disc player input

Audio-Visual input

SAT

Satellite receiver input

PVR

Personal Video Recorder input

VCR

Video Cassette Recorder input

IPOD

Requires an iPod® and Arcam irDock

or drDock.

Internal tuner input

DAB* Internal tuner input

NET

Internal (Ethernet) and external USB

solid-state device (e.g. pen drive) input.

MCH

Selects MCH (multi-channel)

analogue input

AUX

Auxiliary (front panel) input

DISPLAY

e Audio Return Channel (ARC)

from an HDMI 1.4-compliant display.

Use this with an HDMI 1.4-compliant

television using internal TV tuners.

*ese sources are market dependent and may not be

available on your AVR400

Most audio inputs have both analogue and digital

connections. You must specify the type of connection

used for each input using the “Audio Source” option

in the “Input Cong.” menu, see page E-35. Note that an

incorrect setting will result in no sound — the default is

HDMI audio. If you are not using HDMI audio then this

setting must be changed.

e processing mode and Stereo Direct functions are

remembered and recalled for each individual input.

e

MCH input is intended for direct analogue pass-

through of DVD-Audio or SACD sources. Apart from

volume control and level trim, no processing modes

are possible on this input, including AVR400 bass

management and delays. Please set bass management,

speaker size and speaker delays in the source player. You

can copy the distances and relative speaker levels from

the Setup menus in the AVR400.

Stereo Direct

To listen to a pure analogue stereo input, press the

DIRECT button. e Stereo Direct mode automatically

bypasses all processing and any surround functions. In

direct mode, digital processing is shut down to improve

the sound quality and reduces digital noise with the

AVR400 to an absolute minimum.

Note: when Stereo Direct mode is selected, no

digital output is available and no bass management

is performed, meaning that bass signals will not be

redirected to a subwoofer.

Volume control

It is important to realise that the level of the volume

indicator is not an accurate indication of the power

delivered to your loudspeakers. e AVR400 oen

delivers its full output power long before the volume

control reaches its maximum position, particularly when

listening to heavily recorded music. In comparison,

some movie sound tracks can appear very quiet, as

many directors like to keep maximum levels in reserve

for special eect sequences.

Headphones

To use headphones with the AVR400, plug the

headphones into the PHONES socket in the centre of the

front panel.

When headphones are plugged into the front panel

PHONES socket, the outputs for Zone1 are muted and

the audio will be down-mixed to two channels (2.0). e

two-channel down-mix is required so that the centre

channel and surround information can be heard via the

headphones.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Arcam AVR400 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info