Bedienungsanleitung Arcam AVR600 (Seite 40 von 74) (Englisch)

482342

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

E-38

setup menus

e Setup menus allow you to congure all aspects

of your AVR500, AVR600 or AV888. e next few

pages will go through the menu items and explain their

function. e Setup menus will probably look quite

daunting if you are new to setting up home cinema, but

the majority of them need only be congured once when

you rst install the system (or if your system changes or

you move house!)

e only way to view the Setup menus is on your display

device (TV or projector) using the on-screen display

(OSD) capability of the unit. To view the OSD for the

initial setting up, connect any of the video outputs to

your display device. You do not need to have a video

source connected to the video inputs.

Entering Setup mode

To enter the setup menu, press the MENU button on the

remote control or font panel. e front panel display

shows ‘MENU’ and the setup menu (pictured right) is

displayed.

Unstable OSD menu or picture display?

e default AVR500/AVR600/AV888 output video

resolution when rst powered up out of the box is

525-line/60Hz NTSC for analogue video and 480i/60

for digital video. is has been chosen as most display

devices can synchronise to this automatically. is can

be changed in the Video Outputs section of the Setup

Menus.

If the output resolution and frame rate is forced to a

setting your display device does not support, the picture

may become unstable or may not display at all. To reset

the output video resolution and frame rate to the default

values to restore the display, press and hold the

button for three seconds.

Navigating the setup menu

… using the remote control

e setup menu can be navigated by using the cursor

(arrow) keys on the remote control. is is by far the

easiest method.

1. To enter the setup menu, press the

MENU button

(which is located immediately under the navigation

buttons).

2. Use the

and

keys to navigate up and down

the main section headings in the le-hand panel.

3. Once you have the main section that you require

highlighted, use the

key to enter the section.

4. Use the

and

keys to navigate up and

down the section settings in the le-hand panel.

Some settings may be greyed out. ese are either

for information only (e.g. incoming sampling

frequency) or are not currently selectable (e.g.

network IP address when DHCP is used). Scroll bars

on the sides of the right hand panel indicate your

position in the settings list where there are more

items than can be displayed at once.

5. Pressing

OK selects a setting to change it, pressing OK

again de-selects the setting.

6. At any time, press the

MENU button to exit the menu.

Any changes to settings are saved.

… using the keys on the front panel

e front panel controls can be used to congure the

unit. Follow the instructions for using the remote

control, in this case using INPUT for down, INPUT+ for

up, INFO for le and MODE for right.

G e n e r a l S e t u p

A u t o S e t u p

S p k r Ty p e s

S p k r D i s t a n c e

S p k r L e v e l s

V i d e o I n p u t s

V i d e o O u t p u t s

I n p u t C o n f i g

M o d e

Z o n e S e t t i n g s

N e t w o r k

I n c o m i n g F o r m a t : D o l b y D i g i t a l

I n c o m i n g S a m p l e R a t e : 4 8 K H z O u t : 4 8 K H z

I n c o m i n g b i t r a t e : 1 9 2 k b p s

D i a l n o r m : - 3 1 d B

V i d e o I n p u t : D V D

A u d i o C o m p r e s s i o n : O f f

B a l a n c e

B a s s

0 d B

A d ju s t t o c o m pe n sat e f o r a n o f f- c ent r e li s t en i ng

p o si t io n .

A u d i o I n p u t : D V D

Menu panel

e le-hand panel lists the setup

screens available for adjustment. e

selected menu is highlighted with a grey

band.

Help screen

e lower right-hand panel gives a short

help text for the feature being adjusted.

Adjustment panel

e upper right-hand panel lists the

parameters you can change as a user.

e selected line is highlighted with

a black band. Lines that cannot be

selected are greyed-out.

Scroll bars

ese indicate the

position of the

displayed screen

within longer menus.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Arcam AVR600 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Arcam AVR600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info