Bedienungsanleitung Arcam DiVA AVR200 (Seite 14 von 19) (Englisch)

578767

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

AVR200

RDS INFO

FM MUTE/

MONO STORE

PRESET/

TUNE DOWN/UP

MHz

VIDEO 1

DOLBY PL II SPEAKERS

TUNED FM STEREO PRESET

MUSIC

FM MUTE

Using the tuner

The AVR200’s radio tuner can be controlled from the upper row

of front panel buttons (see diagram, below) or from the remote

control handset (see ‘Using the remote control’).

Tuning to a station

Pressing the PRESET/TUNE button toggles between the two

tuning modes of the unit – ‘Preset’ or ‘Tune’. The selected mode

is brieﬂ y shown in the display.

Preset mode

In Preset mode, press the

•

and

•

buttons on the front panel

(or P– or P+ on the remote control handset) to cycle up and

down the preset stations.

See ‘Storing a preset’ and ‘Deleting unused presets’, below.

Tune mode

In Tune mode:

■ Press the

•

and

•

buttons on the front panel (or P– or

P+ on the remote control handset) for longer than half-a-

second to engage automatic tuning. The tuner searches

for a radio station signal of sufﬁ cient strength and stops.

To skip to the next station, press one of the buttons

again. Automatic tuning is available for both the FM and

AM bands.

■ Tapping the

•

and

•

buttons engages manual tuning. This

can be used for tuning to a speciﬁ c frequency. It is also

useful if you are trying to select a station that is too weak

for the auto search mode.

Regardless of the mode used to tune your AVR200, when it

is accurately tuned to a station ‘

•

TUNED

•

’ lights up in the

display.

Storing a preset

To store a preset, tune to the radio station you wish to store.

Press the STORE button: this causes ‘MEMORY’ to ﬂ ash in the

display. Now select the preset number you wish to assign to

the station using the

•

and

•

buttons on the front panel (or

P– or P+ on the remote control handset). Press the STORE

button again.

Once the preset is stored, the display reverts to show the

station name (if RDS information is transmitted) or its frequency.

To quit the memory function without storing a preset, leave the

tuner controls untouched for ten seconds. It is also possible to

overwrite a stored station by saving another in its place. There

are thirty presets available for FM use and ten for AM use.

Your presets are retained for several weeks (but not indeﬁ nitely),

when the AVR200 is disconnected from the mains supply.

Deleting an unused preset

Press the STORE button, then select the preset number you

want to delete using the

•

and

•

buttons (or P– or P+ on

the remote control handset), followed by the FM MUTE/MONO

button.

The display brieﬂ y shows ‘DELETED’ and ‘– –’ is shown in

place of the preset number. You can reactivate a deleted preset

number by storing a station in the normal way.

Radio interference

All Arcam products have been designed to very high

standards of electromagnetic compatibility.

However, both CD players and DACs generate, and can

radiate RF (radio frequency) energy. In some cases this can

cause interference with FM and AM radio reception. If this is

the case, switch the CD player off or keep the CD player and

its connecting cables as far from the tuner and its aerials as

possible. Connecting the CD player and the tuner/ampliﬁ er to

different mains sockets can also help to reduce interference.

EC COUNTRIES -– These products have been designed to

comply with directive 89/336/EEC.

USA – These products comply with FCC requirements.

RDS: Radio Data System

The Arcam AVR200 supports RDS Programme Service and RDS

Radio Text on FM broadcasts.

When a station carrying RDS information is selected ‘RDS’ lights

up in the display and shortly afterwards the station’s RDS name

(e.g. ‘BBC R3’) is shown.

Press the

RDS INFO button to view any RDS text information (if

a station is not transmitting text information, the display brieﬂ y

indicates ‘NO TEXT’ and reverts to show the station name).

Press

RDS INFO again to display the station’s frequency.

Pressing

RDS INFO a third time returns you to a display of the

station name.

If the

RDS INFO button is pressed while tuned to a non RDS

station, the display shows ‘NO NAME’ for three seconds before

reverting to the default display.

FM Mute/Mono

The AVR200’s tuner has an auto-muting circuit that, when

engaged, mutes any signal that is of insufﬁ cient strength for

listening. To engage this circuit press the FM MUTE/MONO

button on the front panel: ‘FM MUTE’ is shown in the display.

If a signal is muted you will hear no sound through the

loudspeakers.

Should you wish to listen to a station that is ‘auto muted’

press the

FM MUTE/MONO button again to disengage the

muting circuit. The tuner now switches to monoaural reception,

cancelling much of the background hiss. ‘FM MUTE’ is no longer

displayed and you are able to continue listening.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Arcam DiVA AVR200 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info