Bedienungsanleitung Arcam DiVA AVR280 (Seite 15 von 38) (Englisch)

578769

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

AVR280

English

Sub Stereo: This setting allows the volume level of the subwoofer to be adjusted for when the

subwoofer is being used with 2-channel (stereo) sources. The subwoofer level for stereo music often

needs to be set at a lower level than that for cinema use; use this trim setting, with a stereo source, to

reduce the subwoofer output in stereo playback to an acceptable level. The level required depends on

various factors such as speakers, the types and styles of music to be played and personal taste.

DVD-A Sub Level: This setting allows compensation for subwoofer level gain from external decoders or

sources (such as DVD-A players).

When decoding digital inputs, the AVR280 follows the convention for products of this type and sets the

subwoofer level 10dB higher than that of the other channels. Source products such as DVD-audio players

do not follow this pattern, however, setting the subwoofer level to be the same as the other channels.

This means that switching from material that has been decoded by the AVR280 to that decoded

externally may mean that the subwoofer sounds very quiet. This setting provides for the removal of that

difference by allowing the subwoofer level of the DVD-A (multi-channel) input to be raised by 10dB.

NORMAL: No gain compensation. This allows the DVD-A sub level to pass directly to the output

with no gain adjustment.

+10DB: This increases the DVD-A (multi-channel input) sub level by 10dB

If you are using the AVR280 in combination with the multi-channel analogue outputs of an Arcam DVD-A

player, then this item should be set to ‘+10dB’.

4 – Speaker Delay Settings

The relative positioning of speakers within a room may mean that sound from some

speakers arrives at the listener later

than sound from others. By altering the

delay settings for the different speakers,

this difference in arrival time can be

reduced or eliminated.

When setting the delay, it should be

imagined that the listener is sitting

in a circle of the speakers; the delay

indicates the distance of the speaker

from the listener.

The speaker distance control can be

used to set automatically the appropriate time delays

required for all the speakers in your system. To use this,

measure from the usual listening position to the front

of each individual speaker in the system and enter this

value in the appropriate place. The measurements can

be entered either in feet or metres, as selected from the

‘General Settings’ menu page.

An alternative to using the speaker distance control is to

enter the delays manually in milliseconds.

Note that the delay adjustment is not a substitute for

proper speaker placement, but can help to ensure

accurate and correct signal arrival times from all the

channels to the primary listening position.

No measurement can be entered for a speaker that is

not selected in the previous ‘Speaker Sizes’ menu.

NOTE: Only enter these delay settings once you have specied which delay units (i.e., Time, Imperial

or Metric) you will be using. The delay settings will be lost if the units are changed.

If the delay units are set to Time, then enter the delay in milliseconds for each channel.









































Distance measurements for 5.1 [and 7.1]

speaker delay settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Arcam DiVA AVR280 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info