Bedienungsanleitung Arcam DiVA AVR280 (Seite 29 von 38) (Englisch)

578769

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

AVR280

English

DTS-ES 6.1 Discrete: This is a true discrete 6.1 channel sound format (unlike DTS-ES 6.1 Matrix

where the sixth (surround centre) channel information is extracted from the two surround

channels). DTS-ES 6.1 Discrete mode operates only on sources with DTS-ES 6.1 Discrete audio

encoding, such as certain DVD discs.

A list of available software titles with DTS-ES 6.1 Matrix and DTS-ES 6.1 Discrete titles can be found at

www.dtsonline.com.

DSP Effects Modes

The AVR280 has a number of effects modes that can be used to enhance a stereo signal and to make

use of the surround loudspeakers. DSP effects modes are only available with stereo source signals.

Music: Music surround makes full use of the additional speakers placed at the centre, sides and rear

of the room. This effect uses ambiance extraction for the side and rear speakers and offers the

most subtle surround processing with no reverberation or reections.

Party: The Party effect allows unprocessed stereo signals to be played over all speakers for

background music or for maximum acoustical output of the system.

Club: The Club effect generates reections and short reverberation information to the front, side and

rear speakers. It simulates a small club venue, such as a Jazz Club.

Concert Hall: The Concert Hall effect generates the ambient information for the simulation of

a medium size hall. Reections and medium length reverberation information are sent to all

channels.

Sports: Sports stadium effect is ideal for use when watching live sports events which would

normally be in stereo. The open ambience of a sports stadium is actively recreated around you,

except from the centre channel which is kept clear for commentary.

Church: The Church effect uses a reverberation algorithm which emphasises rich, smooth

reverberant decay in large spaces. As its name suggests, it works well for simulating a space

with long reverberation time relative to its size, such as a large church or cathedral.

Speaker positioning

The AVR280 allows you to connect up to seven speakers and

an active subwoofer in the main system. The output channels

correspond to speakers installed in the front left, centre, front

right, surround left, surround right, left surround back, right

surround back and an active subwoofer (see diagram).

All speakers, with the exception of the subwoofer, should be

arranged around your normal viewing/listening position (see

diagram). The subwoofer should be placed in accordance with

the instructions of the manufacturer; experiment with it in

various positions to obtain the best result.

Front left and right

Position your front left and right speakers to achieve a good

stereo image for normal musical reproduction. If they are

placed too close together there will be a lack of spaciousness;

if they are placed too far apart a stereo image will appear to

have a large ‘hole’ in the middle and will be presented in two halves. If there is no practical alternative

to placing the speakers widely apart, this effect can be overcome in music reproduction by using centre

sound extraction from the left and right speakers (see the description of ‘Dolby Pro Logic IIx Music Mode’

later in this handbook).

Centre

The centre speaker allows for a more realistic reproduction of dialogue and centre sounds. The centre

speaker should have a similar tonal balance to the front left and right speakers and be positioned at a

similar height.

Surround left and right

The surround left and right speakers reproduce the ambient sound and effects present in a multi-channel

home cinema system and (for home theatre use) should be installed approximately one metre higher

than the listener’s ears.

Surround back left and right

The surround back left and right speakers are used to add extra depth and better sound localisation and

should be installed approximately one metre higher than the listener’s ears. Place the two surround back

speakers such that there is an arc of approximately 150 degrees between each surround back speaker

and the centre speaker. The surround back speakers should face the front of the room as shown in the

diagram to provide the largest ‘sweet spot’.

Note: if you have a 6.1 speaker system, with a single surround back speaker, we recommend that you

connect this speaker to the surround back left channel of the AVR280.

Subwoofer

A subwoofer will greatly improve the bass performance of your system. This is useful for reproducing

special cinema effects, especially where a dedicated LFE (Low-Frequency Effects) channel is available, as

with many Dolby Digital or DTS encoded discs.





























Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Arcam DiVA AVR280 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info