Bedienungsanleitung Arcam DiVA CD62 (Seite 6 von 8) (Englisch)

578773

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

CD62

Using the CR224 remote control

DISP (Display)

Turns the display on or off. Turning the display off generally

produces a slight improvement in sound quality.

A–B

This button enables you to repeat any section of music

within a track. Whilst the disc is playing, press the

A–B

button at the start of the section you wish to repeat.

‘REPEAT’ is shown on the display and the letter ‘A–’ ﬂ ashes.

Press the button a second time when you reach the end

of the section you wish to repeat. The ‘A–B’ letters stop

ﬂ ashing and remain lit. This section will repeat until you

press

or or . The forward search button ( )

moves forward within the selected loop.

REPEAT

To repeat the entire CD or a pre-programmed selection of

tracks press

REPEAT once: ‘REPEAT’ lights on the display.

To repeat a particular track, select that track and then press

REPEAT twice so that ‘REPEAT 1’ is shown on the display. If

you now select a different track, that track is repeated

instead.

To cancel the repeat function press

REPEAT a third time.

TIME

Press TIME once to display the remaining time of

the currently playing track. Press again to display the

time remaining on the disc. Press a third time to

turn the text display on.

Press

TIME again and the display reverts to its original

setting, showing the time elapsed for the current track.

For CDs with text, pressing

TIME once while the disc

is loaded but not playing displays the artist’s name.

Pressing TIME a second time displays the total number of

tracks and the total playing time.

0–9 keypad

This allows direct access to individual tracks on the disc.

To select a track, press the corresponding keypad button.

For tracks greater than 9, enter the digits in sequence. For

example, to play track 15, press and hold

1 until the number

on the display moves to the left, then press

PROG (Program)

You can program a selection of up to 24 tracks from a disc

to play in any order. Select a track by using the

and

buttons, then press

PROG to program the track into memory

(‘PROGRAM’ appears on the display to indicate that you have

started programming a sequence). Repeat these steps to

program the remaining tracks in your selection. Alternatively,

press

PROG once and enter your track selection using the

0–9 keypad.

The display shows the track numbers programmed, the total

length of the programmed sequence and the number of tracks

programmed (shown by a number below the word ‘STEP’).

Each time you enter a track the number below ‘STEP’

increments by one and ﬂ ashes until you press

PROG to conﬁ rm.

If you fail to press

PROG within about ﬁ ve seconds the display

stops ﬂ ashing and you will have to reselect the track.

Press

to play the program. Press again to replay the entire

sequence from the start. Press and hold

CLEAR to erase the

programmed sequence. Press

PROG again to exit the program

facility: the display ﬂ ashes ‘CONTINUE’ and shows ‘0’.

MUTE

Stops sound to the speaker outputs of certain Arcam

ampliﬁ ers.

VOL (Volume) +/–

Adjusts the volume on Arcam remote-controllable ampliﬁ ers.

Note that the volume (+/–) controls and

MUTE button have

no effect on the audio output level of the CD players.

NOTE: Remember to install the two AAA batteries

supplied before trying to use your remote control.

Do not place anything in front of the display area on

the CD player (where the IR receiver is located), or the

remote control may not work.

OPEN

Opens and closes the CD tray.

Skip and Search Track

Skip track backwards and forwards;

Search backwards and forwards (see page 5)

Playback control

Play, Stop and Pause (see page 5).

SHUFFLE

Press once to shufﬂ e play CD tracks (i.e. play them in

a random order). Press again to cancel shufﬂ e play.

Source selection

These operate in the same way as the source selector

on the front panel of an Arcam integrated ampliﬁ er.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Arcam DiVA CD62 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info