Bedienungsanleitung Arcam dv 135 (Seite 14 von 24) (Englisch)

138743

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

DV135

E-14

Audio set-up

This section allows you to congure the analogue, digital and HDMI

audio outputs. In particular, the digital output type needs to be set

correctly if you are using an external audio decoder, receiver or D-A

converter.

Digital audio output

This setting congures the digital audio output – coaxial, optical and

HDMI.

S/PDIF

stereo PCM

When the ‘Stereo PCM’ digital output is selected, all audio material played is

down-mixed to stereo and output as stereo PCM. Use this setting if you have an

external D-A converter that supports only 2-channel PCM.

S/PDIF

bitstream

The Bitstream setting supports the following audio standards:

2 channel PCM (on CDs or DVDs)

Dolby Digital

MPEG multi channel

DTS multi channel

Use this setting if you have a receiver/decoder that supports Dolby Digital.

HDMI (Auto) Select this item if you are using an HDMI connection between your DV135 and

your receiver or display device.

The audio type will be changed automatically to work with the device attached to

your player.

Do not select this item if your HDMI display device or surround-sound

receiver cannot decode audio over HDMI, or if you are connecting to a

DVI device (since a DVI link cannot carry audio) – choose one of the

other settings instead.

DVD sample rate

This needs to be set correctly if you are using an external audio decoder, receiver or D-A converter

connected to the S/PDIF digital audio output.

Max 96KHz Choose this option if your external audio decoder is able to process digital audio

with a sample rate of up to 96kHz, or if you are not using the digital audio

outputs. This is the maximum sample rate present on DVD-video discs.

Max 48KHz Choose this option if your external audio decoder is unable to process digital

audio with a sample rate of up to 96kHz. This is the normal setting for this

menu item.

Note that this setting is relevant only to the output from DVD-video discs.

Audio compression

This option allows compression of the audio stream to be turned on or off, where ‘On’ is intended for

‘late night’ listening when large volume changes are not desirable.

Turning compression on decreases the volume of the louder passages, i.e., the total dynamic range of

the audio is reduced. Normally, however, this item is set to ‘Off’, to disable compression.

This menu option affects both the analogue and the HDMI outputs (although note that the HDMI output

is affected only when multi-channel uncompressed audio is requested by the receiver, not otherwise).

The co-axial and optical digital audio outputs are never affected by this menu setting.

Compression is available only on Dolby Digital recordings.

VCD mode

Some VCD discs are produced with a dual-mono soundtrack. This means that the left audio channel

carries one language, the right another. In this case it can be useful to listen to just one of the channels.

Stereo

The default setting. Choose this option to play the VCD with both channels

audible.

Left channel only

Choose this option to play the VCD with only the left channel audible. The audio

from the left channel will be routed to both the left and right speakers.

Right channel

only

Choose this option to play the VCD with only the right channel audible. The audio

from the right channel will be routed to both the left and right speakers.

This setting applies only to VCD discs.

Video post-processing (lip-sync.)

Delay for NTSC (ms)/Delay for PAL (ms)

Modern displays and video scalers often employ digital video processing that can introduce a

signicant video delay. The ‘Delay’ menu items allow correction of this effect by delaying the audio

soundtrack up to 150 milliseconds. The amount of correction required in a given system is best

determined by experimentation.

If the interlaced video outputs of the DV135 are in use and the display is converting the signal to

progressive scan then we recommend a delay of 50–80ms, depending upon the display.

If the progressive video output of the DV135 is in use, the player corrects automatically for its

own processing delays and it is unlikely that additional delay will be necessary. Therefore, start

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Arcam dv 135 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info