Bedienungsanleitung Arcam dv 139 (Seite 5 von 26) (Englisch)

138744

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

English

DV139

E-5

SCART output

The SCART connector is common on European A/V equipment and provides a convenient connection

method between your DVD player and display device, carrying both video and stereo audio.

If you are using a SCART connection and you do not wish to listen to the audio through your TV, then it

is best to mute your TV’s speakers; muting the TV will prevent this audio being heard.

Note that the SCART output has a control signal that switches your TV to its SCART

input when the DV139 is turned on. It will also signal to wide-screen TVs the correct

aspect ratio (16:9 or 4:3), provided this feature is supported by the TV.

HDMI digital video

The HDMI connector offers uncompressed digital video and audio transmission between the

DV139 and the display device, and provides the highest quality output. Generally, it is also the

easiest connection type to congure.

To use this video connection, you will require a HDMI or HDMI/DVI cable between the DV139 and your

display device or receiver. See page 22 for further details.

Making audio connections

The DV139 offers a number of alternatives for connecting audio. The connection type to use depends on

the rest of your system; chose the type most appropriate to your amplier.

If you want to listen to audio through... ...we recommend the following:

Your television

How you listen to audio through your TV depends on the inputs it has and

your video connection:

SCART: If you are using a SCART connection, this will carry stereo

audio. No further connection is required.

HDMI: If you are using an HDMI connection (not DVI), this will carry

audio. No further connection is required.

Stereo phono: (For use with a connection type other than SCART or

HDMI.) If your TV has stereo phono inputs, follow the instructions

below for a stereo amplier.

Your stereo amplier

If you wish to listen to audio from your player through a stereo amplier, then

use the stereo analogue outputs. These outputs provide a stereo down-mix of the

source material.

Using a stereo phono cable of a suitable length, connect the outputs labeled

L/R STEREO OUT to the left and right inputs (respectively) for DVD or CD on your

amplier.

Your multi-channel amplier

Using phono cables of a suitable length, connect the multi-channel analogue

outputs of your DVD player to the multi-channel input of your amplier (labelled

something like ‘DVDA’, ‘SACD’ or ‘5.1 IN’). Ensure that each channel is connected

as labelled (so that the left-channel output from the DVD player is connected to

the left-channel input on the ampler).

If you are using three stereo ampliers to provide the amplication, we

recommend grouping related channels within an amplier: use one amplier for

the left and right channels, one for the two surround channels and one for the

centre channel and (if necessary) the subwoofer.

Your surround-sound receiver

Connect either the HDMI or one of the S/PDIF digital outputs to the ‘DVD’ input

of your receiver. These digital outputs provide PCM, Dolby Digital, DTS or MPEG

multi-channel audio, depending on the source material.

Listening to DVD-audio or SACD discs

The high quality of DVD-audio and SACD discs can be realised only by using either the multi-channel

analogue or the HDMI outputs. Using a conventional digital connection between your DVD player and

surround-sound receiver will not allow you to hear these discs at their best, since the audio carried

across the digital link when these discs are played is compromised (i.e. limited to a sample rate of 48K).

This is true for all DVD players and is not a limitation of your DV139.

If you wish to use a surround-sound receiver for decoding your movie sound-track, but also want to

enjoy DVDA/SACD, we recommend either following the connection advice given above for ‘multi-channel

amplier’ in addition to using the digital audio connection, or using an HDMI connection to your

receiver.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Arcam dv 139 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info