Bedienungsanleitung Arcam dv 139 (Seite 17 von 26) (Englisch)

138744

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

English

DV139

E-17

Dolby Pro Logic II

Dolby Pro Logic II decoding is designed to produce a 5-channel analogue output from two-channel source

material.

Set this item to one of the following. Due to the different recording methods used for movies and music, it

is recommended that the correct decoding mode for your source material is used to obtain the best results.

Off No Dolby Pro Logic decoding is performed.

Dolby

Pro Logic

Dolby Pro Logic decoding is performed. Dolby Pro Logic decoding is a legacy mode,

and we recommend using one of the Dolby Pro Logic II decoding options instead.

Movie Movie mode should be used with material marked as ‘Dolby Surround’ encoded.

Music Music mode is for use with any stereo music recording. As the optimum decoding

method varies according to the recording, Music mode allows user adjustment of

the processing characteristics; information about adjusting the Music mode by

using ‘Dimension’, ‘Centre Width’ and ‘Panorama’ controls can be found below.

Matrix The Matrix mode is the same as the Music mode except that the directional

enhancement logic is turned off. Matrix mode may be used to enhance mono

signals by making them seem ‘larger’.

Dimension

(This setting can be adjusted only when Dolby Pro Logic II Music mode is selected.)

‘Dimension’ allows you to adjust gradually the soundeld either towards the front or towards the rear.

If a recording is too spacious or strong from the surrounds, it can be adjusted ‘forward’ to get a better

balance. Likewise, if a stereo recording is somewhat too ‘narrow’ sounding, it can be adjusted toward the

rear to get a more enveloping, immersive result. We recommend ‘Dimension’ is set to 0 for normal use.

Centre Width

(This setting can be adjusted only when Dolby Pro Logic II Music

mode is selected.)

With Dolby Pro Logic II decoding, dominant centre signals come

only from the centre speaker. If no centre speaker is present,

the decoder splits the centre signal equally to the left and right

speakers to create a ‘phantom’ centre image. The Centre Width

control allows variable adjustment of the centre image so it may

be heard only from the centre speaker; only from the left/right

speakers as a phantom image; or from all three front speakers

to varying degrees. We recommend ‘Centre Width’ is set to 3 for

normal use.

Panorama

(This setting can be adjusted only when Dolby Pro Logic II Music mode is selected.)

Panorama extends the front centre image to include the surround speakers for an exciting ‘wrap-around’

effect with side wall imaging.

L R

Display Centre spreading

effect

0 No centre spreading

1 20.8°

2 28°

3 36°

4 54°

5 62°

6 69.8°

7 Phantom centre

The ‘Centre Width’ setting

for Dolby Pro Logic II

Music Mode

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Arcam dv 139 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info