Bedienungsanleitung Arcam Logo (Seite 8 von 32) (Deutsch, Englisch, Holländisch, Französisch)

578804

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Technical specifications

System design One-way speaker, with 10 litres internal volume. The cabinet is solidly

constructed from machined MDF with internal bracing.

Drive unit 10” (254mm) subwoofer drive unit with long excursion, magnetically

shielded.

Frequency range 20Hz to 250Hz

Impedance 4Ω nominal

Sensitivity 85dB/watt, measured at 1m

Crossover Fourth order Linkwitz-Riley crossover circuit, 24dB/octave (80dB/decade),

adjustable for frequency and Q.

Connections

LEFT, RIGHT and SUB inputs and outputs: RCA phono sockets (gold), max

2.5V, >22kΩ. The unit may be ‘daisy-chained’.

Mains supply 100V–240V at 50/60Hz. Fuse T2.5AL 250V

Ampliﬁer 200 watts/4Ω, under normal operating conditions, 275W max.

Finish Black paint

Dimensions 280 x 280 x 416mm (WxDxH)

Mass Net 15kg (Note: Take care when lifting the unit)

Note that all speciﬁcation values are typical, unless otherwise stated.

Continual improvement policy

Arcam has a policy of continual improvement for its products. This means that designs and speciﬁcations are

subject to change without notice.

specification

Worldwide Guarantee

This entitles you to have the unit repaired free of

charge, during the ﬁrst two years after purchase, at

any authorised Arcam distributor provided that it

was originally purchased from an authorised Arcam

dealer or distributor. The manufacturer can take no

responsibility for defects arising from accident, misuse,

abuse, wear and tear, neglect or through unauthorised

adjustment and/or repair, neither can they accept

responsibility for damage or loss occurring during

transit to or from the person claiming under the

guarantee.

The warranty covers:

Parts and labour costs for two years from the

purchase date. After two years you must pay for both

parts and labour costs. The warranty does not cover

transportation costs at any time.

Claims under guarantee

This equipment should be packed in the original

packing and returned to the dealer from whom it

was purchased, or failing this, directly to the Arcam

distributor in the country of residence.

It should be sent carriage prepaid by a reputable

carrier – not by post. No responsibility can be

accepted for the unit whilst in transit to the dealer or

distributor and customers are therefore advised to

insure the unit against loss or damage whilst in transit.

For further details contact Arcam at:

Arcam Customer Support Department,

Pembroke Avenue, Waterbeach,

CAMBRIDGE, CB25 9QR, England

or www.arcam.co.uk.

Problems?

If your Arcam dealer is unable to answer any query

regarding this or any other Arcam product please

contact Arcam Customer Support at the above

address and we will do our best to help you.

On-line registration

You can register you product on-line at

www.arcam.co.uk.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Arcam Logo Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info