Bedienungsanleitung Arcam MZ8 (Seite 12 von 18) (Englisch)

578805

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

Worldwide Guarantee

is entitles you to have the unit repaired free of charge, during the

rst two years aer purchase, at any authorised Arcam distributor

provided that it was originally purchased from an authorised Arcam

dealer or distributor. e manufacturer can take no responsibility for

defects arising from accident, misuse, abuse, wear and tear, neglect or

through unauthorized adjustment and/or repair, neither can they accept

responsibility for damage or loss occurring during transit to or from the

person claiming under the guarantee.

The warranty covers:

Parts and labour costs for two years from the purchase date. Aer two

years you must pay for both parts and labour costs. e warranty does

not cover transportation costs at any time.

Continuous power output (1kHz at 0.1% THD)

Single zone, both channels, 8

Ω 80W 

Single channel, 4

Ω 116W 

Harmonic distortion, 80% power, 8

Ω at 1kHz 0.01%

Power output, all zones all channels driven, 8Ω at 1kHz, 0.1% THD+N 65W  per channel

Inputs

Nominal sensitivity 0.9V—1.5V

Input impedance 11k

Ω

Signal/noise ratio (CCIR, 45W) 101dB

General

Mains voltage 110—120V or 220—240V

Power consumption (maximum) 600W

Heat dissipation (maximum) 1,715 BTU/h

Power consumption, idle MZ12: 110W; MZ8: 73W

Heat dissipation, idle MZ12: 375BTU/h; MZ8: 256 BTU/h

Power consumption, standby 0.6W

Heat dissipation in standby 2 BTU/h

Dimensions W x D x H (including feet, excluding rack ears and connectors) 432mm x 436.5mm x 144.5mm (19” rackmount x 3U)

Weight (net) MZ12: 24.7 Kg; MZ8 19.3 Kg.

Weight (packed) MZ12: 27.3 Kg; MZ8 21.9 Kg.

Supplied accessories mains lead

E&OE

NOTE: All specication values are typical unless otherwise stated.

Continual improvement policy

Arcam has a policy of continual improvement for its products. is means that designs and specications are subject to change without notice.

Specications

Product

Guarantee

Claims under guarantee

is equipment should be packed in the original packing and returned

to the dealer from whom it was purchased, or failing this, directly to the

Arcam distributor in the country of residence.

It should be sent carriage prepaid by a reputable carrier – not by post. No

responsibility can be accepted for the unit whilst in transit to the dealer

or distributor and customers are therefore advised to insure the unit

against loss or damage whilst in transit.

For further details contact Arcam at:

Arcam Customer Support Department,

Pembroke Avenue,

Waterbeach,

CAMBRIDGE,

CB25 9QR,

England

or via www.arcam.co.uk.

Problems?

If your Arcam dealer is unable to answer any query regarding this or any

other Arcam product please contact Arcam Customer Support at the

above address and we will do our best to help you.

On-line registration

You can register your product on-line at www.arcam.co.uk.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Arcam MZ8 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info