Bedienungsanleitung Arcam P1 (Seite 2 von 16) (Englisch)

578752

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

C31/P38/P1

E-2

English

C31/P38/P1

E-3

Safety guidelines

Important safety instructions

These products are designed and manufactured to meet

strict quality and safety standards. However, you should

be aware of the following installation and operation

precautions:

1. Take heed of warnings and instructions

You should read all the safety and operating instructions

before operating these products. Retain this handbook for

future reference and adhere to all warnings in the handbook

or on the product itself.

2. Water and moisture

The presence of electricity near water can be dangerous. Do

not use these appliances near water – next to a bathtub,

washbowl, kitchen sink, in a wet basement or near a

swimming pool, etc.

3. Object or liquid entry

Take care that objects do not fall and liquids are not spilled

into the enclosure of a unit through any openings. Liquid-

lled objects such as vases should not be placed on these

products.

4. Ventilation

Do not place these units on a bed, sofa, rug or similar

soft surface, or in an enclosed bookcase or cabinet, since

ventilation may be impeded. We recommend a minimum

distance of 50mm (2 inches) around the sides and top of

the each unit to provide adequate ventilation.

5. Heat

Locate these products away from naked ames or heat

producing equipment such as radiators, stoves or other

appliances (including other ampliers) that produce heat.

6. Climate

These products have been designed for use in moderate

climates.

7. Racks and stands

Only use a rack or stand that is recommended for use with

audio equipment. If the equipment is on a portable rack it

should be moved with great care, to avoid overturning the

combination.

8. Cleaning

Unplug a unit from the mains power supply before cleaning.

The cases should normally only require a wipe with a soft,

damp, lint-free cloth. Do not use paint thinners or other

chemical solvents for cleaning.

We do not advise the use of furniture cleaning sprays or

polishes as they can cause indelible white marks if the unit

is subsequently wiped with a damp cloth.

9. Power sources

Only connect an unit to a power supply of the type

described in the operating instructions or as marked on the

product itself.

The primary method of isolating these products from the

mains supply is to remove the mains lead from the rear of

the unit. These products must be installed in manner that

makes this disconnection possible.

These are Class 1 devices and must be earthed.

10. Power-cord protection

Power-supply cords should be routed so that they are not

likely to be walked on or pinched by items placed upon or

against them. Pay particular attention to cords and plugs,

and the point where they exit from the unit.

11. Grounding

Ensure that the grounding means of these products is not

defeated.

12. Power lines

Locate any outdoor antenna/aerial away from power lines.

13. Non-use periods

When using the stand-by function, a small amount of

current will continue to ow into the unit. Unplug the power

cord of a unit from the outlet if it is to be left unused for a

long period of time.

14. Abnormal smell

If an abnormal smell or smoke is detected from a unit, turn

the power off immediately and unplug the unit from the

wall outlet. Contact your dealer for further advice.

15. Servicing

You should not attempt to service these products beyond

that described in this handbook. All other servicing should

be referred to qualied service personnel.

16. Damage requiring service

These products should be serviced by qualied service

personnel when:

A. the power-supply cord or the plug has been damaged,

B. objects have fallen, or liquid has spilled into the

appliance, or

C. the appliance has been exposed to rain, or

D. the appliance does not appear to operate normally or

exhibits a marked change in performance, or

E. the appliance has been dropped or the enclosure

damaged.

Safety compliance

These products have been designed to meet the IEC 60065

international electrical safety standard.

RISQUE DE CHOC ELECTRIQUE

NE PAS OUVRIR

ATTENTION

CAUTION

RISK OF ELECTRIC

SHOCK DO NOT OPEN

CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing

to qualied service personnel.

WARNING: To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture.

The lightning ash with an arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated

‘dangerous voltage’ within the product’s enclosure that may be of sufcient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the product.

CAUTION: In Canada and the USA, to prevent electric shock, match the wide blade of the plug to the wide slot in the socket

and insert the plug fully into the socket.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Arcam P1 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Arcam P1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info