Bedienungsanleitung Arcam solo movie 2 1 (Seite 25 von 30) (Englisch)

160350

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

E-25

movie 2.1

solo

English

Searching for stations

Pressing the P/TUNE button when the radio is

selected as the music source toggles between the

two tuning modes of Solo Movie 2.1 – ‘Preset’ or

‘Tune’. The selected mode is shown brieﬂy on the

display.

When in preset mode, pressing the

buttons on the remote control (

on the front

panel) selects the previous/next station preset (if

these are deﬁned).

Note that these buttons have no effect, in preset

mode, if no presets are deﬁned.

In tune mode, by contrast, pressing these buttons

changes the AM/FM tuning frequency or selects the

next DAB radio station from the station list.

FM/AM

To search for new stations, ensure that Solo Movie

2.1 is in ‘Tune’ mode, as described above.

< Manual tuning. Press the

buttons to

select the desired tuning frequency. This can

be used for tuning to a speciﬁc frequency. It is

also useful if you are trying to select a station

that is too weak for automatic tuning.

< Automatic tuning. Press the

buttons on the remote control (or

the front panel for longer than one second)

to engage automatic tuning. Solo Movie 2.1

searches for a radio station signal of sufﬁcient

strength, then stops. To skip to the next station,

press one of the buttons again. Automatic

tuning is available for both FM and AM.

DAB

Tuning stations in under DAB is different from

conventional FM or AM tuning, in that you do not need

to know the transmission frequency of the station –

this is handled for you by Solo Movie 2.1.

Select DAB as the source, then press the

button. Navigate through the menu options (see

page 15) until ‘DAB Setup’ is displayed. There are

two options under this menu item – ‘Scan’ and ‘Erase

settings’. Selecting ‘Scan’ causes Solo Movie 2.1 to

search for new DAB stations. Found stations are

added automatically to the list of available stations

when the scan is completed.

To select a DAB radio station, press the

buttons on the remote control until the name of the

station you want to listen to is displayed. The station

is tuned in automatically after a delay of about two

seconds.

Setting station presets

You can store your favourite radio station in one of the

radio ‘presets’, giving quick access to the station in the

future without the bother of having to re-tune. Solo

Movie 2.1 provides for 30 preset radio stations, which are

shared between DAB, FM, and AM (as ﬁtted).

To store a preset, ﬁrst tune to the radio station you wish

to store. To store the station into one of presets 1–9,

press and hold the appropriately numbered button on

the remote control until the ‘preset saved’ message is

displayed.

An alternative method, giving access to presets 10–30,

is to press

MENU to enter Solo Movie 2.1 conﬁguration

menu (described fully on page 15), then to navigate

through the menu until ‘Store Preset’ is displayed. At this

point, using the

and

buttons on the remote control

(

on the front panel) allows selection of the

preset number you wish to use for the station (if a preset

is in use already, then the name or transmission frequency

of the station held in the preset is shown on the bottom

line of the display; empty presets are indicated by ‘Empty’

being shown). When the preferred preset number is

shown, press OK to store the preset. Note that saving a

radio station into a location occupied already will cause

the original preset station to be overwritten by the new

one.

Your presets are retained when Solo Movie 2.1 is

disconnected from the power supply.

Selecting station presets

Solo Movie 2.1 must be in preset mode before preset

stations can be selected (see above).

To cycle through your preset stations, use the

buttons on the remote control (

on the front

panel). Alternatively, presets can be selected directly by

using the numeric keypad on the remote (as described

on page 13).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Arcam solo movie 2 1 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Arcam solo movie 2 1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info