Bedienungsanleitung Arcam solo movie 2 1 (Seite 28 von 30) (Englisch)

160350

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

E-28

Solo Movie 2.1 plays a wide range of disc types, which

include:

DVD-Video (single region, set at factory)

DVD-Audio

SACD version 1.3

MPEG2-encoded video ﬁles

MPEG4-encoded (DivX) video ﬁles (in AVI, MP4,

and MP4-Nero formatting

CDDA (‘normal’ audio-CDs) including HDCD

decoding, CD-R, and CD-RW

Video CD, and SVCD

MP2, MP3, WMA, and OGG audio ﬁles (some

restrictions apply)

JPEG image ﬁles on CD (Picture CDs) and DVD.

Other disc formats may not play correctly in this player.

DVD-R/RW and CD-R/RW discs (Audio CDs and Video

CD/Super VCDs) recorded using a DVD recorder, CD

recorder or personal computer are not guaranteed to

play in the Solo Movie 2.1. Incompatibility may be due to

a number of possibilities, including the type of disc used

and the recording method.

CD -R/RW and DVD-R/RW compatibility

This unit will play CD-R and CD-RW discs

recorded in CD Audio or Video CD/Super VCD

format, or as a CD-ROM containing the audio

and video ﬁle types listed above. Other content

may cause the disc not to play, or to create noise/

distortion in the output.

This unit will play DVD-R/RW discs that are

recorded using the DVD Video format, or as a

DVD-ROM containing the audio and video ﬁle

types listed above.

This unit cannot be used for recording discs.

This player is compatible with multi -session discs,

but plays only sessions that are closed. Unﬁnalised

discs cannot be played.

File names must not contain blank spaces or

special characters (.+/=).

A CD-ROM used to compile your ﬁles must be

ISO 9660 Level 1 or Level 2 compliant.

CD physical format: Mode1, Mode2 XA Form 1, or

Mode2 Form 2.

File names up to 15 characters are supported.

A DVD-ROM used to compile your ﬁles must be

ISO 9660 Level 1 or Level 2 compliant.

Each disc (CD or DVD) may contain up to 1500

directories. Each directory may contain up to 220

ﬁles.

Compressed audio compatibility

The Solo Movie 2.1 will play CD- or DVD-ROM discs

containing ﬁles saved in the MPEG 1 Audio Layer 2

(MP2), MPEG 1 Audio Layer 3 (MP3), Windows Media

ﬁle (WMA) and OGG formats, with sampling rates of

44.1 or 48kHz. Incompatible ﬁles will not play correctly,

potentially causing noise or distortion on the audio

outputs.

Fixed bit- rate ﬁles are recommended. Variable bit -

rate (VBR) ﬁles are playable, but the playing time

may not be shown correctly.

This player recognises only tracks that are named

with the ﬁle extensions ‘.mp3’, ‘.wma’, ‘.mp2’ and

‘.ogg’ (names are not case-sensitive).

There are many different recording bit-rates

available to encode your audio ﬁles. Those

supported by this player are:

For MP2, MP3 and

OGG playback

The following constant bit rates are

supported: 32, 64, 80, 96, 112, 128, 160, 192,

256 and 320 kilobits per second. Variable bit

rate (VBR) between 96kb/s and 320kb/s is

also supported.

For WMA

playback

The following constant bit rates are

supported: 48, 64, 80, 96, 128, 160 and

192kb/s.

Note that MP3 audio encoded at 128 kbps or higher

should sound close to regular CD Audio quality. This

player will play lower bit -rate MP3 or WMA tracks, but

be aware that the sound quality becomes noticeably

worse at lower bit -rates.

Picture disc compatibility

Solo Movie 2.1 will play CDs or DVDs containing JPEG

images.

Only ﬁles with the .jpg or .jpeg extension will be

recognised (names are not case-sensitive).

Kodak picture discs are supported (only the ﬁles in

the JPEG directory will be shown on the screen).

Fuji picture discs are supported (select the JPEG

ﬁles in the clips menu).

Konica and QSS picture discs are not supported.

PC created disc compatibility

If you record a disc using a personal computer,

even if it is recorded in a ‘compatible format’

as listed above, there will be cases in which the

disc may not be playable in this machine due to

the setting of the application software used to

create the disc. In these particular instances, check

with the software publisher for more detailed

information.

Check the DVD-R/RW or CD-R/RW software

disc boxes for additional compatibility information.

disc types supported troubleshooting

Problems with video

No video (blank screen)

Check that the HDMI cable is connected correctly

at both ends. If an HDMI-equipped A/V receiver

is in use, try connecting Solo Movie 2.1 directly to

the display device, in order to isolate where the

fault may lie.

The fault may be an HDCP (authentication) failure

with the HDMI device.

Check that the display device is set to display the

HDMI input (i.e., has not been set to some other

video input, instead).

Check that the HDMI input of the receiver and/or

display device is enabled. See the user handbook of

the connected device for details on doing this.

Using an alternative video display device (e.g.,

connected via the composite video out), check

that the ‘Video Resolution’ item on the Video page

of the Set-up menu is set to ‘Auto’. See page 18

for details on how to do this.

Consult the user handbook of the display device

to ensure that it can handle the output formats

provided by Solo Movie 2.1. Is it one of the

following?

720 x 480p (NTSC progressive scan)

720(1440) x 480i (NTSC interlaced) **

720 x 576p (PAL progressive scan)

720(1440) x 576i (PAL interlaced) **

1280 x 720p (HDTV progressive scan)

1366 x 768p (Widescreen progressive scan)

1920 x 1080i (HDTV interlaced)

** Resolutions not available with HDMI

At least one of these standards must be supported by

the connected device in order for it to work correctly

with Solo Movie 2.1.

No video (random noise)

Random noise will be displayed if the content-protection

algorithm fails to authenticate the attached device.

This will occur, for example, if a DVI device that does

not support HDCP (such as a computer monitor) is

connected to Solo Movie 2.1.

To attempt to isolate this problem, remove all discs from

Solo Movie 2.1, then power-off both Solo Movie 2.1 and

the connected display device. Switch the display device

on, then Solo Movie 2.1 – at this point, the idle logo of

Solo Movie 2.1 should be shown on the display device.

If this is not the case, please check the items listed above

for a blank screen.

If the noise appears when a copy-protected disc (DVD)

is played, then it is the authentication that is failing. Please

contact your dealer for further information.

Problems with audio

The type of audio provided by the HDMI connector

depends on the conﬁguration of Solo Movie 2.1 (see

‘Audio Setup’ on page 19). Note that pure DVI devices

(connections requiring a HDMI to DVI convertor cable)

do not support audio via this connection.

Note that for audio to be transmitted over HDMI, ‘Digital

audio out’ must be set to ‘HDMI’.

Arcam solo movie 2 1 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Arcam solo movie 2 1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info