Bedienungsanleitung Arcam solo movie 5 1 (Seite 16 von 30) (Englisch)

371605

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

1 6

This section of the document describes the use of

the ‘Set-up’ menu, which allows you to ﬁne-tune Solo

Movie 5.1 to the other items in your system (such as

your video display, speakers and room layout), and to

conﬁgure some personal preferences.

Obtaining a picture

To view the Set-up menu for the initial conﬁguration,

we recommend the use of the composite video

output to connect to your display device. This is

because the high quality video output has several

display modes and may be incompatible with your

display device in its default conﬁguration.

Ensure that your display device is switched on and

that you have selected the correct video input. You

should see the screen shown below. This is the image

that Solo Movie 5.1 gives when there is no disc

playing.

The Display set-up menu

For optimum video performance it may be necessary

to conﬁgure your display for the video source – Solo

Movie 5.1, in this case. A series of test patterns

generated by Solo Movie 5.1 allows you to optimize

colour balance, contrast, brightness and to centre

your picture. Full instructions for each test pattern

are displayed on the screen before the test pattern is

shown.

To enter the Display set-up menu, move the

cursor down to the ‘Display’ button on the screen and

press OK. Follow the on-screen instructions and press

SETUP at any time to quit from a page (or press OK

on the last screen to Exit).

advanced

set-up

Using the Set-up menus

Your Solo Movie 5.1 has two different set-up menus:

The Set-up menu allows conﬁguration of all

aspects of Solo Movie 5.1. Conﬁgurable items

and their potential values are described on the

following pages.

The Display set-up menu is a series of video

test patterns with instructions that help you to

optimize your display for Solo Movie 5.1.

Remember that to use the CR100 remote

control for advanced set-up, you ﬁrst have to

set it to AMP or DVD mode by pressing the

AMP or DVD button.

The Set-up menus

To enter the Set-up menus:

1. Press and hold the front panel

MENU button for

more than one second.

or,

1. Using the remote control, press the

AMP or

DVD button to ensure that the CR100 is in one

of these modes

2. Press the

SETUP button.

You can press MENU (front panel) or SETUP (remote

control) at any time to quit from a page and save all

the settings.

The Set-up menu comprises six pages of options.

– Operation, Video, Audio, Speakers, Delays and Trims.

The tabs on the left side of the screen show the

pages available. To change between pages, move the

menu highlight to the appropriate tab (using the

and

buttons).

To change an item, ﬁrst use the

controls to

highlight the item, then press OK to open the list of

options for the menu item. The current option for the

menu item is ticked. Select a new option using the

controls and conﬁrm the selection with OK.

(If the item to be changed is controlled by a slider,

press OK to activate the slider, move it using the

controls, conﬁrming the setting with OK.)

Note that options that are not currently applicable are

shown ‘greyed out’, and cannot be highlighted or changed.

Screen saver

To protect your screen from damage from a

persistent static image, a screen saver starts after a

few minutes of inactivity.

An Arcam logo appears at random locations around

the screen. To restore the previous screen image,

press the

(stop) button on the front panel or the

remote control.





Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Arcam solo movie 5 1 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Arcam solo movie 5 1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info