Bedienungsanleitung Archos AV700 (Seite 35 von 55) (Englisch)

27544

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

Windows

Please verify* that you have Windows

XP and it is updated it to at least, Service Pack 1 . You must also

have Windows Media

Player 10 (WMP10) installed on your computer. This way, you can take advantage of

connecting it as a ‘ Windows Device ’. Connect it to your PC as enumerated above and you can then see the

AV 700 in Windows

Explorer and WMP10. Without Windows

XP Service Pack 1 (a free update) or Windows

Media

10, you cannot use it as a Windows

recognized ‘Device’ and will have to follow the instructions for

Windows

ME & 2000 below.

* Right-click on ‘My Computer’ select ‘Properties’, and then look in the tab labeled ‘General’. It should say “Service Pack

1” or higher.

Windows

ME and 2000

Attention: Before connecting the AV 700 to your computer with the

USB cable, go to the setup action icon and then to System and USB

Port and change it to ‘Hard Drive’.

When connected to your computer, the AV 700 will be recognized as an external Hard

Drive and display automatically within a few seconds of being connected. You will

see a new drive letter, such as E: in My Computer called AV 700. You can now use

the hard drive called AV 700 like any other external hard drive. Simply access it using

Windows

Explorer to drag and drop ﬁ les to and from the AV 700’s hard drive.

Macintosh

™

OS X

If you have OS X, you must update to version 10.2.4 or newer. You must also change the AV 700’s

USB Port setting to ‘ Hard Drive ’. From the main menu, go to the setup action icon and then to

System and USB Port and change it to ‘ Hard Drive ’.

You will now simply plug the AV 700 into your Macintosh

as enumerated above, and within a few

seconds, the AV 700 will be recognized as a mass storage device (Hard Drive) and mount on the

desktop. You can now use the hard drive called AV 700 like any other external hard drive.

18.3 Disconnecting the AV 700 from your Computer

Windows Device Mode

If the AV 700 is connected to your computer as a Windows Device, verify that no data is being transferred

between your AV 700 and your computer (the HDD light on your AV 700 is not ﬂ ickering). You can now

safely unplug the USB cable from your AV 700 and/or computer.

Hard Drive Mode

If the AV 700 is connected to your computer as a hard drive, DO NOT SIMPLY PULL OUT THE USB

CABLE AT ANY TIME!

WARNING: You must properly remove (unmount) your AV 700 from the computer before

disconnecting the USB cable to avoid loss of data or freezing the computer and/or the AV 700.

Hard Drive Mode & Windows

To safely disconnect the AV 700 hard drive, click on the system tray remove icon (green arrow as shown below)

and follow the instructions. Wait until you get a message saying that you can safely unplug the device before

disconnecting the USB cable.

1. The safe remove icon is in the system tray next to the clock.

Windows

XP Windows

2000 & Windows

2. Click on the icon to eject (unmount) the AV 700 from the computer and select the ‘Safely remove’ message.

3. There will be a message indicating that it is now safe to disconnect

the AV 700. You can now safely unplug the USB cable from your

AV 700 and/or computer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Archos AV700 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Archos AV700

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info