Bedienungsanleitung Archos AV700 (Seite 44 von 55) (Englisch)

27544

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

23.6 Connection (5): the S-Video In

If you would like to get a higher quality video recording, and your video recorder, cable box or other

video device has an S-video output, you can connect a standard S-video cable from it to your TV

docking pod. This will carry only the video signal to the pod and your AV 700, not the audio. The video

pass thru feature is not supported for S-Video input.

DO NOT PLUG IN BOTH THE S-VIDEO CONNECTOR AND THE STANDARD YELLOW AV IN

CONNECTOR AT THE SAME TIME.

23.7 Connection (6): the Infrared Emitter

This is an optional connection. You will need to use this if you would like to change TV channels with the ARCHOS

™

remote control or if want to be able to make scheduled recordings. This emitter, once stuck on to your cable box,

satellite receiver, or video cassette recorder, will be able to turn that device on and off and select channels while

you are away. The emitter acts like the remote control for that device.

Infrared (IR) Emitter

Which device to control?

You will afﬁ x the IR Emitter to the device you normally change your TV channels with. Do you change TV channels

with your video cassette recorder remote control, your cable box remote control, or your satellite receiver remote

control? Which ever one of these devices changes the channel that you view, then it is on this device that you

will afﬁ x the IR Emitter.

Locating the Infrared Receptor on your VCR or Cable box

First, you must locate the infrared detector on the device. This is the small dark window (looks black or deep red

actually) which you point your remote control at to change the channels. We will use a video cassette recorder

(vcr) as an example, but the following is true also for a cable box or satellite receiver.

Look in your device’s user manual to see if it shows you where the infrared detector window is. If you ﬁ nd it, then

jump to the next step “Connecting it to the TV docking pod”.

One way to locate the infrared receptor on your VCR is to cover up various

parts of the face of your VCR with your hand while changing the channels

and notice at what point your VCR’s remote control stops working. By

covering up various parts of the face, you will stop the infrared beam from

reaching the infrared receptor. Keep changing the channels with your

remote control, moving your hand over various areas until you have found

where the infrared receptor is.

Connecting it to the TV Docking Pod

Plug the connector end of the Infrared Emitter to the far right

jack on the back of the TV Docking Pod. This emitter will act as

your remote control for your scheduled recordings.

Sticking it onto your device and Setting the IR Emitter code

Now that you know where the infrared receptor is, you need to set the correct infrared emitter code on your

AV 700 and then afﬁ x the IR emitter to your device. Every VCR, cable box, and satellite receiver has a different

infrared code to tell it to turn on and off and how to change channels. With the IR emitter in one hand, move it over

the infrared receptor on your cable box, VCR, or satellite receiver and then set the infrared code as explained

in the chapter VIDEO – Setting the Infrared Emitter Code . Once you get the AV 700 to start controlling your

device by infrared signals (there are test buttons for this – see the TV Control setting for help), you can then peal

off the white ring protecting the adhesive, and stick the IR emitter to your device. If your regular remote control for

this device is sensitive to distances, you could afﬁ x the Infrared Emitter slightly to the left or right of the device’s

receptor so as not to impede the functioning of the regular remote control.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Archos AV700 Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Archos AV700

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info