Bedienungsanleitung Archos PMA400 (Seite 23 von 39) (Englisch)

27566

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

In order for MPEG4-Translator to compress the video in a file of the format MPEG-4 SP that the

Gmini™ can read, it requires an MPEG 4 codec to be installed on your computer.If you do not

have the approporiate codec installed, MPEG-4 Translator will tell you on start up which codec it

requires. You will be able to download it for free from the Internet.

Virtual Dub™

VirtualDub is an utility for transcoding one video file into another. This is a general purpose

transfer and cleanup utility which has many options allowing for even the most difficult video

translations. When you install it onto your PC from the PMA430, it will automatically unzip. It

will prompt you to save it to C:\Program Files\VirtualDub. You should use this default directory

location or will have to instruct the Mpeg4 translator program where to find it.

MPG4 Translator

This program, developed by ARCHOS , is a “Front-end” for the Virtual Dub program. It sets all

the parameters for Virtual Dub specifically to create a video file in the right size and format to be

read by the PMA430. When you run it for the first time, the MPEG4 Translator will need to locate

the Virtual Dub program. If you did not install Virtual Dub in the default location, it will ask you

to navigate to the directory where it was installed when you open MPEG4 Translator.

MP3 Sound Codec

Remember, in order for the PMA430 to be able to play the video, it must have an MP3, PCM

(standard .wav), or ADPCM (compressed .wav) sound track. If the source video file did not have

one of these sound track formats then your destination file will have no sound. MPG4 translator

will signal this error condition. In order to keep the sound of your video, install an MP3 encoder

for Virtual Dub to use. There are MP3 codecs (usually packaged together as an encoder and

decoder) available on the Web for you to download. If you choose to use the LAME codec, make

sure that you have a version built with the ACM front-end. You can find other MP3 codecs on the

web by using the search terms ACM, MP3 and CODEC in your favorite web search engine. Once

this MP3 codec is installed into your system, MPEG4 Translator will be able to create final video

files with MP3 sound, even if the source video file does not have an MP3 sound track.

If you are unsure what codecs (audio and/or video) have

been installed on your computer, you can see the list by

going to the following location.

For Windows XP, click on Start > Settings >

Control Panel > Sounds and Audio Devices

Properties > Hardware > choose Audio Codecs,

then click on Properties. You will find a list here of all

the audio codecs that are installed on your computer.

Decoding of MPEG 2 video files is currently not

supported by MPG4 Translator. These are usually .mpg

or .mpeg format files, not the required AVI file. There

are other tools found on the Internet (FlaskMPEG,

Rippack, etc.) that may be downloaded in order to help you with these file types. A good starting

place is the website www.digital-digest.com.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Archos PMA400 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Archos PMA400

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info