Bedienungsanleitung Archos PMA400 (Seite 29 von 39) (Englisch)

27566

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

This next screen allows you to choose your

hardware connection type.

• Infrared port (IrDA)

• USB port (when an optional ARCHOS

USB/Ethernet cable is connected)

• built-in Wifi card.

Click on WirelessLAN and then click on

Add.

Choose the IP Configuration Type

Typically there are two types of Wifi

connections, one at home or work, and one

at a public Wifi hot spot. Public Wifi spots

will assign your device an IP number. You

simply select Configure IP automatically

and when the connection to the hot

spot/public Wifi point is made, it will assign

your PMA430 an IP address. On the other

hand, in a home network situation or in a

work environment (check with your system administrator), you might have to configure the IP

address by hand. In this case, click on Configure IP manually. Ask the person who set up your

Wifi network for an IP address for your PMA430 to connect to the local network.

Scan for active Access Points

Click now on the Wireless tab. You now

click on the Scan… button to scan for an

active WiFi access point that is

broadcasting. If you have a home network,

make sure that your WiFi device has the

SSID set to On. This means that your Wifi

access point is broadcasting a message

telling any device in the area that it is

available for a network connection. Several

access points could be available, but if the access point is not broadcasting its availability, the

Scan function will not ‘see’ it.

The network type will usually be Infrastructure. If you want to connect Wifi devices to talk to

each other, such as for networked game playing, then choose the Ad Hoc option. This is a

connection between local devices. Click on Any Network if you just want to accept the first

network access point that your PMA430 can find.

Choose the Access Point

There may be more than one access

point in your vicinity. In this

example, there are two. Let’s choose

the one called Logan_Wifi. You will

notice that the connection quality is

lower than that of the access point

named WF500. This is because the

WF500 access point is getting a better

signal (probably due to less

obstructions between you and the

access point). The lower the quality of

the connection, the slower the data

transfer speed and thus the slower your web pages or e-mail will load. Highlight the access point

you want to use and click on Select. If the access point shows Encryption as Yes, than you will

have to contact the access provider or system administrator for the encryption (WEP) parameters,

which you can set on the WEP tab. Your connection is now set. Click on OK to exit.

Service Created

Your service has now been created. The next

time you go to the Services tab, you will see all

the services that you have previously created.

When you are connected to a network, you can

open the Network application and see the

current quality of the data transmission signals

by looking at the Current tab.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Archos PMA400 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Archos PMA400

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info