Bedienungsanleitung Arctic Spas Athabascan (Seite 18 von 124) (Englisch)

765016

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

Care of the Spa Cover

WARNING: The cover is a manual safety cover that meets or exceeds all prevailing requirements of

ASTM Standards for spa safety covers when installed and used correctly as of the date of manufacture. Non-

secured or improperly secured covers are a hazard. Open the cover to its fully open position before use. Be

sure to inspect the cover for premature wear or deterioration. Over time, with use, there is a chance of normal

cover wear and deterioration. To properly maintain your cover see directions below.

Vinyl Cover

The vinyl spa cover is an attractive, durable foam insulation product. Monthly cleaning and conditioning is

recommended to maintain its beauty.

To clean and condition the vinyl cover:

1. Remove the cover from the spa and gently lean it against a wall or fence.

2. With a garden hose, spray the cover to loosen and rinse away dirt or debris.

3. Using a large sponge and/or a soft bristle brush, and using a very mild soap solution or

baking soda, scrub the vinyl top in a circular motion. Do not let the vinyl dry with a soap lm

on it before it can be rinsed clean.

4. Scrub the cover’s perimeter and side aps. Rinse clean with water.

5. Rinse o󰀨 the underside of the cover with water only (use no soap), and wipe it clean with a

dry rag.

6. To condition the cover after cleaning, apply a thin lm of Arctic Pure® Cover and Cabinet Renew to the

vinyl surface and bu󰀨.

Weather Shield Care and Cleaning

Weather Shield The material used to make covers is a solution dyed polyester fabric designed

to be exible and easy to maintain. Its urethane coating enhances the stability of the weave and allows for

greater water resistance, while also minimizing shrinkage and stretching. Weather Shield features a high UV,

water, mold and mildew resistance and has excellent tear and abrasion resistance.

1. Care and Cleaning: Weather Shield is designed to be easy to maintain. It can be washed, or

brushed o󰀨 and rinsed. Proper care and cleaning is important to maximaize the life of all fabrics.

2. For normal Care and Cleaning: Add 2 ounces of mild soap such a Woolite or Dawn

dishwashering liquid to a gallon of lukewarm water. Clean the fabric with a “soft bristle brush”. Rinse

thoroughly cold water and air dry.

3. For Stubborn Stains: Make a mixture of bleach and water by adding a maximum of 1 cup

of bleach to 1 gallon of water. Spray the mixture on lightly to the fabric face (non-coated side). Do not

soak the fabric. Prolonged exposure to harsh chemicals can damage the coating. Rinse immediately.

Do not leave on for more than 2 minutes. Cleaning with harsh cleaners such as bleach will require a

retreatment like 303 High Tech Fabric Guard.

MANUAL SAFETY COVER

1818

Owners Manual - Arctic Spas®

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Arctic Spas Athabascan Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info