Bedienungsanleitung Ardes AR4A20 (Seite 7 von 27) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

801723

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

7 / 27

Disconnect the unit from the power supply during

cleaning operations.

ATTENTION : read this booklet carefully it contains important instructions for a safe

installation, use and maintenance.

Important instructions to be kept for future reference.

Keep handy the guarantee, receipt of payment and these instructions for future use and

reference.

After removing the packaging, check the appliance for any signs of damage.

In case of visible damage, do not use it and contact a qualified technician.

Do not leave parts of the packaging within the reach of children.This appliance is not a

children’s toy: it is an electrical device and must be treated with the necessary caution.

Before connecting the appliance, make sure that the power supply voltage matches the

indication on the data plate.

If the plug and socket are not compatible, the socket has to be replaced with a suitable type

by skilled persons.

Do not use adapters or extension cables which do not meet current safety standards or that

exceed the current carrying capacity limits.

When you don’t use the appliance disconnect it from the power supply and assure that the

interruptor is off.

Do not tug on the power cable or on the appliance itself to remove the plug from the socket.

The use of any electrical appliance requires that a number of basic rulesare observed,

namely:

- Never touch the appliance with wet or humid hands.

- Do not use the appliance when barefoot.

- Do not leave the appliance exposed to weathering (rain, sunlight).

- Do not subject it to rough handling.

The appliance has been designed and manufactured to operate in the home as ASH

VACUUM CLEANER. Any other use is considered inappropriate and dangerous.

Do not use the appliance out of doors.

In case of a breakdown or malfunctioning of the appliance, disconnect it at once.

Do not attempt to repair it, but take it to a service centre approved by the manufacturer.

If you decide you do not want to use this appliance any longer, disable it by cutting the power

cable - of course, after disconnecting it from the socket.

The power cable should be extended to its full lenght to avoid over heating.

For safety reasons, the appliance should never be opened.

Place the appliance on a fiat surface during use.

USER INSTRUCTIONS

(see figure at the end of the booklet)

1 - Handle

2 – Switch

3 – Top cover

4 – Container cover

5 – Connection for SUCTION function

6 – Flexible metal hose

7 – Rigid aluminium pipe

8 – Dust shaking button

9 – Locking clip

10 – Container

11 – Filter presence switch

12 – Motor base

13 – Motor ventilation grid

14 – Washable HEPA filter

15 – screw for HEPA filter

16 – Fireproof fabric filter

17 – Connection for BLOW function

1. Install the HEPA filter (14) on the motor base (12) and secure it well with the fixing screw

(15). The plastic part of the filter must press against the filter presence switch (11),

otherwise the unit will not work (figure 2 at the end of the booklet).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ardes AR4A20 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info