Bedienungsanleitung Ardes AR4P11D (Seite 16 von 24) (Englisch, Italienisch)

801741

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

• Power 3 (G icon - 3 bars on in the display): the appliance work at the

maximum power level (2000W)

5. To distribute the air ow over a wider surface, press the swing

pushbutton: it start to swing from right to left and viceversa. To stop

the appliance in the desired position, simply press the oscillation

pushbutton again.

6. To turn off the product press On-Stand-by pushbutton: the display

will show a countdown fro about 30 seconds. After 30 seconds the

appliance will be in stand-by mode.

7. To completely turn off the product the main switch must be in “0”

position (off).

The product is equipped with adjustable thermostat by stopping the air

ow as soon as the desired ambient temperature is reached; hot air will

start to ow again when the ambient temperature drops. To select the

desired temperature press “+” or “-” pushbutton after set the power level

(minimum, medium or maximum). The set temperature will displayed on

the display.

The set temperature can be displayed in either °C or °F; to set the unit

of measurement of temperature turn on the product, push and keep

pushing “+” pushbutton until the unit of measurement will ashing on the

display. Push “+” pushbutton to select the desired unit of measurement;

wait a few seconds for the setting to be memorised.

To activate ECO function press ECO pushbutton. The ECO icon will

be displayed. This function will compare the target temperature with

the current ambient temperature and it will automatically select the

most appropriate heating power level to guarantee an optimum comfort

level while reducing the energy consumption. (Attention: this function is

available only if one power level 1, 2 or 3 is selected). When the ECO

function is on, ECO icon (A) is dispalyed and the appliance may switch

automatically to a lower or higher heating level even several time. The

corrisponding heating level is always shown on the display (G icon).

The appliance is equipped with 24 hours timer that allow to set the

automatic start or automatic off of the product. To set the automatic start:

when the product is in stand-by mode press TIMER pushbutton; TIMER

icon (F) and the time remaining before the appliance will be turned on

blink on the display. To adjust the timer press “+” or “-” pushbuttons then

wait a few seconds for the setting to be memorised. On display stand-by

icon and timer icon blinking indicating that the timer for auto on is set.

When the programmed time is reached, the appliance is turned on with

the setting used during the previous period of operation. Attention: when

the timer for auto start is setted do not turn off the product from the main

switch.

To set automatic off: when the product is on, press TIMER pushbutton;

the TIMER icon (F) and the time remaining before the appliace turn off

blink on the display. To adjust the timer press “+” or “-” pushbuttons then

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ardes AR4P11D Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info