801744
21
Zoom out
Zoom in
Vorherige Seite
1/28
Nächste Seite
21
Operation
-Push On/O󰀨 (1) button: the appliance will turn on and you can select the
desired functiont. Press this button when the unit is working to turn it o󰀨;
the display will show the ambient temperature.
-Push Power selection button (2) repeatedly to select: fan mode only, low
power (the indicator light “E” will be on in the display) or high power (the
indicators light “E” and “D” will be on in the display).
-Push Oscillation louvers button (3) to activate/deactivate the automatic
oscillation louvers. If this function is activated the “F” indicator light will
be on in the display.
-Push Timer button (4) when unit is on to set the automatic shutdown
from 1 to 12 hours. Each pressing increase 1 hour time. If the timer
function is activated the “G” indicator light will be on in the display. To
deactive timer function, push timer button till the display show “0 0” or
turn the unit o󰀨 manually.
-Push Timer pushbutton (4) when unit is in stand-by mode to set the
automatic on from 1 to 12 hours (timer on function). Each pressing
increase 1 hour time. If the timer on function is activated the display
shows the appointment turn-on time and the indicator light will be on
in the display. After the setting time the unit ll turn on automatically in
automatic working mode.
The setting temperature is the latest setting temperature (every time the
appliance is switched o󰀨 by the main switch(1), this temperature will be
set to 25°C) and the indicator light related to the timer will turn o󰀨 in
display. To deactive timer on function, push timer button till the display
show “0 0”.
-Push Ionizer function button (5) when the unit is on to activate ionizer
function. Push again this button to deactivate this function. If the ionizer
Buttons:
1. On/O󰀨
2. Power selection (low/high)
3. Oscillation louvers
4. Timer
5. Ionizer function
6. Increase button
7. Decrease button
Indicator light:
A. Display
B. Celsius degree indicator
C. Remote control receiver
D. High power level indicator
E. Low power level indicator
F. Oscillation louvers indicator
G. Timer indicator
H. Ionizer function indicator
21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Ardes AR4P17 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info