Bedienungsanleitung Ardes AR5AMR08 (Seite 17 von 66) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

801810

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

17 / 66

ON/OFF Button (A):

Press On/Off button one time to activate the fan. The unit will start to operate and

lower speed and the “Low” indicator light will illuminate on the display.

Press On/Off button when unit is on to turn it off.

SPEED Button (B):

Press Speed button when unit is on to select the desired air speed: lower, medium

or high. The selected speed is indicated by indicator light on the control panel:

“Low” is lower speed, “Mid” is medium speed, “High” is high speed.

TIMER Button (C):

When the unit is operating, you can set the timer to switch the fan off automatically

after the set time. Press Timer button repeatedly to select the desired time period in

2 hours increments from 2 hours to 12 hours. The related indicator light (2H, 4H,

6H) will illuminate on the control panel. When all the indicator light are off means

that timer is not setted and the unit will continuously work until you switch off

manually the unit.

SWING Button (D):

Press Swing button when the unit is operating to activate the automatic left/right

oscillation of vertical louvres. The “Swing” indicator light will illuminate on the

control panel. Press again Swing button to deactivate the automatic swing; “Swing”

indicator light (G6) will turn off on the control panel.

COOLER Button (E):

Press Cooler button (E) when the unit is operating to activate the evaporative

cooling function.

This function use water so make sure about water level in the water tank before turn

on this function. The ice boxes provided increase the cool effect: before use, fill them

with water and put in the refrigerator until they are completely frozen. After that insert

the frozen ice boxes in the water tank making sure that water level is under maximum

level allowed. When this function is activated, the “Cooler” indicator light (G5) is

illuminated in red colour on the control panel.

To deactivate the evaporative cooling function press Cooler button (E).

If the evaporative cooling function is deactivated, the “Cooler” indicator light (G5) is

off on the control panel and the unit work as a fan.

Mode Button (C)

Press this button when unit is on to select the desired mode: normal, natural mode

(the indicator light G4 will blink in the control panel) or sleeping mode (the indicator

light G4 will turn on in the control panel).

(EN) Maintenance

Before carrying out routine cleaning, switch off the fan and disconnect mains power.

For external cleaning use a soft and dry cloth.

DO NOT dip the device in water, or splash it with any other liquids.

DO NOT use solvents or any other chemical products for cleaning it.

When you do not use it, after cleaning it, store the fan in a dry place.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ardes AR5AMR08 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info