Bedienungsanleitung Ardes AR8U10 (Seite 7 von 28) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

801805

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

7 / 28

If you decide you do not want to use this appliance any longer, disable it by cutting the power

cable - of course, after disconnecting it from the socket.

The power cable should be extended to its full lenght to avoid over heating.

For safety reasons, the appliance should never be opened.

The appliance has been designed and manufactured to operate as a humidifier in the home.

Any other use is considered inappropriate and dangerous.

Do not use the appliance out of doors.

Do not direct the steam jet against people, objects or the walls.

Take care never to turn the appliance upside down while it is in use.

Place the appliance on a fiat surface during use.

Even if the appliance runs dry, this does not damage it nor does it consume power.

In order to avoid irreparable damage to the appliance and malfunctioning, never pour any

other substance than water (e.g. salt) into the reservoir. If this should be done by mistake,

rinse it out at once with tap water.

Do not direct the flow of steam towards electrical appliances, or other materials (eg., Mobile)

not resistant water or humidity.

Instructions for use AR8U10

(see drawing at the end of the booklet)

1 - Nozzle

2 - Head cover

3 - Handle

4 - Water tank

5 - Water tank cover

6 - Bowl

7 - Transducer

8 - Operation button /

speed delivery

9 - Filter

Remove the water tank, turn it upside down, open the cover by turning counter clockwise

and fill the tank with clean water (cold water, 40°C max, previously boiled).

Close the tank and place it over the base carefully. Settle the nozzle and top cover on top.

Pressing the operation button, it will light up in fuchsia and the humidifier will start to steam;

each pulse will increase the speed the button will change color from fuchsia to green

(medium speed) and blue (top speed).

When the water finishes, the button turns red and the unit is beeping 5 times.

Instructions for use AR8U20

(see drawing at the end of the booklet)

1 - Nozzle

2 - Head cover

3 - Handle

4 - Water tank

5 - Water tank cover

6 - Hygrometer.

7 - Bowl

8 - Transducer

9 - Internal lamp

10 - Display

11 - Operation button

12 - Aroma box

Remove the water tank, turn it upside down, open the cover by turning counter clockwise

and fill the tank with clean water (cold water, 40°C max, previously boiled).

Close the tank and place it over the base carefully.

Settle the nozzle and top cover on top. Plugging the unit, the temperature appears on the

display.

Press the operation button (A), the device will start emitting steam continuously; pressing

the button for the steam control (B), you can vary the intensity of the steam up to 4 levels.

During continous operatios, it is possible to set the AUTO function. The appliance detects

automatically the suitable humidity level related to the ambient temperature and it sets the

nebulization speed:

- high speed if the air humidity is less than suitable level;

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ardes AR8U10 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info