801728
26
Zoom out
Zoom in
Vorherige Seite
1/80
Nächste Seite
26
ON/OFF Button (A)
Press this button when unit is in stand-by mode to turn it on.
At the rst time, the unit will start to work at speed 2 and its indicator light
will turn on in the control panel.
Press this button when the unit is on to turn it o󰀨.
NOTE: the fan will run according to the settings it was last used
before it was turned o󰀨 when device switched on next time.
NOTE: pressing this button in heating mode, the unit will work for
approx 10 seconds in fan mode in order to cool down the heating
element.
SPEED (B) Button (in fan mode)
Press this button when the unit is on to select the desired speed: 1, 2, 3,
4, 5. Cyclic function.
The relative indicator light will turn on in the control panel according to
the speed selected.
HORIZONTAL OSCILLATION Button (C)
Press this button when the unit is on to activate automatic horizontal
oscillation. The related indicator light will turn on in the control panel.
VERTICAL OSCILLATION Button (D)
Press this button when the unit is on to activate automatic vertical
oscillation. The related indicator light will turn on in the control panel.
NOTE: vertical and horizontal oscillation can be activated at the same
time.
NOTE: under normal shutdown conditions, the vertical swing motor
returns to the lowest point of the swing before shutting down.
TIMER / TEMPERATURE Button (E) (control panel)
FAN MODE: press this button one time to set the timer. The related
indicator light (“h”) will turn on in the control panel.
Press the button e1-e2 (in the control panel or remote control) to set
timer to switch the fan o󰀨 automatically after the set time from 1 hour to
12 hours (1 hour step).
Display will show the time in hours before the automatic shutdown.
To deactivate timer function repeatedly press e2 button till the display will
show “0” and wait the device exit timer setting.
HEATING MODE (NON ECO mode): press this button one time to set the
desired temperature (default 35°C). Display will show the temperature in
°C blinking. Press e1-e2 button (in the control panel or remote control) to
set the desired temperature (form 15°C to 35°C, 1°C step).
26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Ardes ARCF01 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info