665680
3
Zoom out
Zoom in
Vorherige Seite
1/4
Nächste Seite
7
V 2/13
as flammable, explosive, chemical-laden or wet atmosphere.
Do not place the mosquito killer on soft surfaces, like a bed, where openings may become blocked. Always place the
mosquito killer on a stable, flat, level surface when operating, to avoid the chance of the overturning. Locate the power
cord so the mosquito killer or other objects are not resting on it.
In order to avoid accidents turn unit off if unattended.
In the event of any problems (abnormal noise or a strange smell) switch off the appliance immediately, do not attempt to
repair it and take it to your local after sales service.
WARNING: DO NOT TO BREAK UV-A LAMPS. They contain mercury that must not be released into the environment.
DESCRIPTION OF PARTS
HOW TO USE THE APPLIANCE
This portable mosquito killer emits low power ultraviolet rays (U-A) to attract light sensitive flying insects, such as flies, moths,
mosquitoes. These insects are electrocuted by metal grids electrically charged and subsequently fall into the device from
where they can be removed. No chemicals, smells, sprays, dusts, vapors are used.
Mosquito killers are pollution free and harmless to people and animals.
Do not use this mosquito killer in an area with high humidity, full of dust or water.
This mosquito killer is suitable for houses, factories, offices, stores, hotels, restaurants, pubs, clinics, nursing homes.
This appliance is equipped with an intake fan that increases the ability to attract insects.
This appliance does not need to be installed.
Position the unit on a flat, stable surface.
Connect the power cord to a suitable power socket (220-240V~).
ONLY FOR INDOOR USE – DO NOT USE OUTDOOR
Close the windows and doors and turn the lights off.
Place the mosquito killer in a dark corner of the room.
ON/OFF SWITCH
Pressing the ON/OFF switch the appliance turns on and begins to operate.
To switch off the mosquito killer press the button again.
1. Front grid
2. ON/OFF switch
3. Front panel
4. High voltage grid
5. PCB panel
6. Rear grid
7. Intake fan
8. Transformer
9. UV-A lamp
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Argo Barbastello wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Argo Barbastello

Argo Barbastello Bedienungsanleitung - Französisch - 4 seiten

Argo Barbastello Bedienungsanleitung - Italienisch - 4 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info