Bedienungsanleitung Argo Einar Plus (Seite 14 von 23) (Englisch)

805048

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

37V 05/23

3. MODE BUTTON

Press this button on the control panel to select the operating mode among: Heating, (Heat), Cooling (Cool),

Dehumidication (Dry), Ventilation (Fan) in the following circular sequence:

The corresponding LEDs on the display light up on the control panel according to the selection made.

The LED ring located on the front of the appliance changes color according to the selected operating mode:

- Cooling (Cool): blue

- Heating (Heat): orange

- Dehumidication (Dry): white

- Ventilation (Fan): Green

On the remote controller it is possible to directly select the desired operating mode by pressing the button: COOL

(the icon lights up on the remote controller display) - HEAT (the icon lights up on the remote controller

display) - DRY (the icon lights up on the remote controller display). To set FAN mode, press MODE button on

remote controller, the icon lights up and Fn will be displayed).

4. SLEEP BUTTON

Press this button on the control panel or remote controller. When Sleep mode is selected, the LEDs on the

control panel lights up, while the Sleep LED on the control panel remains on continuously.

It is possible to adjust the operating mode, except in the Ventilation mode and the temperature.

The ventilation speed, on the other hand, cannot be adjusted and the appliance operates constantly at low speed.

The Sleep function allows the unit to operate silently, saving energy.

• In cooling mode, after 1 hour of operation the temperature increases by 1 °C, after the second hour the

temperature increases by another 1 °C. After 5 hours of consecutive operation, the temperature still increases

by 1°C. After a total of 10 hours of consecutive operation, the appliance exits Sleep mode and resumes

normal operation.

• In Heating mode, after 1 hour of operation the temperature decreases by 1 °C, after the second hour the

temperature decreases again by 1 °C. After 5 hours of consecutive operation, the temperature decreases

again by 1°C. After a total of 10 hours of consecutive operation, the appliance exits Sleep mode and

resumes normal operation.

5. TIMER BUTTON

By control panel:

• When the air conditioner is off, press “TIMER” to set a time to turn on the unit. Press “UP” or “DOWN“ to set

the hour, and press “TIMER” again to conrm.

• When the air conditioner is on, press “TIMER” to set a time to turn off the unit. Press “UP” or “DOWN“ to set

the hour, and press “TIMER” again to conrm.

To set the switch-off or switch-on time of the appliance, press the Timer button, “00” will ash on the display for

three seconds, with the UP/DOWN buttons it is possible to select the desired time. Timer time selection range is

0-24 hours. Then press the Timer button to conrm the chosen time.

To cancel the Timer function, press and hold the button for about 3 seconds.

By remote controller:

On the remote controller, when this function is activated, the icon remains lit on the remote controller display.

• To activate the On timer, press the button twice, 01 will be shown on the remote controller display. It is

therefore possible, with the UP/DOWN buttons, to set the appliance on time up to 24 hours. When the set

time ashes on the display for 5 seconds, it indicates that the setting has been made correctly.

• To activate the Off Timer, press the button twice, the remote controller display will show the time remaining

before switching off.

To cancel the Timer function, hold down the button for about 3 seconds and the icon on the display will turn off.

6. SWING / WIFI BUTTON

Swing function

When the unit is on, press this button on the controller panel or on the remote controller to select the horizontal

automatic swing of the air aps, the LED lights up on the control panel. Press this button again to stop the

swinging of the aps, which will then remain xed in the same position. The LED on the control panel will turn off.

It is possible to manually adjust the vertical aps by directing them to the desired position.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Argo Einar Plus Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Argo Einar Plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info