Bedienungsanleitung Argo Emix (Seite 18 von 29) (Englisch)

665482

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

HOW TO DISCONNECT AND/OR REMOVE EMIX TANK UNIT

How to disconnect the refrigerant circuit

In case of Emix Tank is connected to a normal indoor unit port, (for example with G30 or G42) the unit must be discon-

nected exactly as any other indoor unit. On the outdoor unit, electrically disconnect the reversing valve to force the

system in cooling.

In case of Emix Tank is connected to the Emix port and by any reason it has to be disconnected and replaced, the installer

has to do this procedure using a refrigerant recovery unit:

• close the valves of Emix port that connect Emix Tank to outdoor unit;

• connect the refrigerant recovery unit to one of the two valves;

• recover the refrigerant inside the copper pipes and Emix Tank unit;

• disconnect Emix Tank;

• reconnect another Emix Tank unit;

• make the vacuum;

• restore the refrigerant from recovery unit to the pipe and Emix Tank unit;

• disconnect the recovery unit;

• re-open the valves of Emix port that connect Emix Tank to outdoor unit.

In case of Emix Tank is connected to the Emix port and by any reason it has to be removed de nitively, the installer has

to do this procedure using a refrigerant recovery unit:

• close the valves of Emix port that connect Emix Tank to outdoor unit;

• connect the refrigerant recovery unit to one of the two valves;

• recover the refrigerant inside the copper pipes and Emix Tank unit;

• disconnect Emix Tank;

• reconnect the bypass disconnected during the  rst installation;

• disconnect the recovery unit;

• make the vacuum on the bypass;

• re-open the valves of Emix port that connect Emix Tank to outdoor unit;

• switch on the outdoor unit in cooling mode;

• recover the refrigerant inside the system connecting the recovery unit to one of the liquid valve of indoor units or to

the pressure valve of the inlet tube;

• disconnect the recovery unit.

How to empty the water tank

In case Emix Tank has to be removed or replaced, proceed as

follows to empty the water tank:

• close the water inlet valve of Emix Tank;

• open the sinks’ taps of users connected to Emix Tank. Al-

ternatively, open the vent valve placed on the top of the

tank;

• connect to tube 1 (see  gure) a discharge pipe for the water

contained in the tank;

• the water will come out from the tank through the connect-

ed tube.

INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH THE EUROPEAN

DIRECTIVE 2012/19/EU

At the end of its working life this equipment must not be disposed of as an household waste.

It must be taken to special local community waste collection centres or to a dealer providing this service.

Disposing of an electrical and electronic equipment separately avoids possible negative effects on the environment

and human health deriving from an inappropriate disposal and enables its components to be recovered and recycled

to obtain significant savings in energy and resources.

In order to underline the duty to dispose of this equipment separately, the product is marked with a crossed-out dustbin.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Argo Emix Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Argo Emix

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info