Bedienungsanleitung Argo Greenstyle Plus (Seite 10 von 30) (Englisch)

805092

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

41V 11/22

turns off. The ventilation speed will automatically switch to the lowest level available to ensure maximum quiet

operation during night rest.

Note: press the MODE button or the ON/OFF button to cancel the SLEEP function setting. The SLEEP function

cannot be activated in FAN mode.

12. SWING BUTTON (vertical oscillation)

Press this button to set the automatic vertical swing mode, which allows the outer aps to swing from top to bottom

and vice versa. Press this button again to deactivate the SWING function.

13. SWING BUTTON (horizontal oscillation)

This function is not available. However, it is possible to direct the air ow manually, by moving the aps of the

indoor unit horizontally.

14. ANTI-F BUTTON

This air conditioner has a special drying and anti-mold function. This function is controlled by the remote control in

the COOLING, DRY and AUTO modes. When the air conditioner is operating in the heating mode, the indoor

fan runs for three minutes on weak ventilation before stopping. The purpose of this function is to dry the water

inside the evaporator and prevent the formation of mold which can cause the dispersion of a strange odor. This

function is not set by default, it can be freely set and deactivated. The setting method is as follows: when the air

conditioner and remote control are off, point the remote control at the unit and press the “Anti-F” button, the unit

will beep ve times and then indicate that this function is set. Once set, this function remains valid unless the air

conditioning is completely switched off or the function is manually deactivated.

To deactivate the function:

• Turn off the unit.

• When the air conditioner and the remote control are off, point the remote control at the unit and press this

button, the device emits a sound three times and this indicates that the function is disabled.

Note: when this function is active, it is advisable not to restart the air conditioner before it is completely stopped.

This function will not be active if the unit is switched off or stopped by the “SLEEP” function.

15. ELE.H/ECO BUTTON

• ELE.H (function not available)

• ECO: if you press this button in COOL mode, the unit will activate the ECO mode which has the lowest

electricity consumption and that is automatically deactivated after 8 h. If you change the mode or turn off the

remote control, the function ECO will be automatically canceled. Press the ECO button in ECO mode to exit

this mode.

OPERATION MODE

Automatic mode (AUTO)

• Press the “MODE” button, select the automatic operation mode.

• By pressing the “SPEED” button, you can select the fan speed from LOW, MID, HIGH, AUTO.

• Press the “ON/OFF” button, the air-conditioner starts to operate.

• Press the “ON/OFF” button again, the air-conditioner stops.

COOLING mode: The default set temperature is 20 °C. When the ambient temperature exceeds 20 °C the unit starts

to operate in cooling. Below 20 ºC it only works in ventilation.

HEATING mode: The default set temperature is 25 °C. When in room the temperature is below 25 °C the unit starts

working in heating.

COOLING/HEATING mode

• Press the “MODE” button, select the Cooling or Heating operation mode.

• By pressing the “ “ or “ “ you can set the temperature from 16 °C to 32 °C, the display changes as you

touch the button.

• By pressing the “SPEED” button, you can select the fan speed from LOW, MID, HIGH, AUTO.

• Press the “ON/OFF” button, the air-conditioner starts to operate.

• Press the “ON/OFF” button again, the air-conditioner stops.

FAN mode

• Press the “MODE” button, select the fan operation mode.

• By pressing the “SPEED” button, you can select the fan speed from LOW, MID, HIGH.

• Press the “ON/OFF “ button, the air-conditioner starts to operate in FAN mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Argo Greenstyle Plus Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Argo Greenstyle Plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info