Bedienungsanleitung Argo Loki Plus WF (Seite 13 von 20) (Englisch)

805049

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

V 01/22

(1) POWER BUTTON

Press this button to switch the unit on or off.

When switched on, the appliance will start functioning based on its last settings (save function).

(2) MODE SELECTION BUTTON (MODE)

Press this button to select the various operating modes, according to the following sequence:

In the COOL mode the display lights up. In the DRY and FAN modes the display does not light up.

(3) SLEEP BUTTON (on both the remote control and portable unit)

Press this button to reduce to minimum the ventilation, for the most silence.

Note: The sleep mode cannot be started in ventilation mode.

(4) FAN SPEED ADJUSTMENT BUTTON

Press this button when the appliance is switched on for adjusting the ventilation speed in cooling mode, as follows: High,

Medium, Low:

The fan speed cannot be adjusted in DRY mode and is fixed to low speed.

(5) TIMER BUTTON (on both the remote control and portable unit)

Press and hold this button for 1 second to set the timer.

1）Timer-on (automatic switch-on)

When the appliance is off, this button is used to set a delay after which the unit will switch on.

Remote control: press “TIMER” to set a time to turn on the air conditioner. Press +/- to set the time, and press

“TIMER” again to confirm it. The “G” icon will remain on to indicate that the TIMER has been set.

Portable unit: Press TIMER. Press Timer again to select a number of hours from 1 to 24. Press the TIMER button to

confirm.

2）Timer-off (automatic switch-off)

When the appliance is running in the COOL mode, set a delay after which the unit will switch off.

Remote control: press “TIMER” to set a time to turn on the air conditioner. Press +/- to set the time, and press

“TIMER” again to confirm it.. The “G” icon will remain lit to indicate that the switch-off TIMER is running.

Portable unit: Press TIMER. Press Timer again to select a number of hours from 1 to 24. Press the TIMER button to

confirm.

Resetting the timer: If a TIMER has been set, press TIMER to display the delay. Press TIMER again to cancel the

setting.

(6) “SWING” BUTTON

Press “SWING” top turn on or off the swing function.

(7) TEMPERATURE UP DOWN AND TIMER ADJUSTMENT BUTTONS

The temperature can be adjusted to between 16 °C and 30 °C.

Increase temperature（UP ):

1) Allows for adjusting the desired temperature in cooling (COOL) mode.

2）Whenever the（UP ) button is pressed, the set temperature increases by 1 °C.

Decrease temperature (DOWN

1) Allows for adjusting the desired temperature in cooling (COOL) mode.

2）Whenever the (DOWN

)

button is pressed, the set temperature decreases by 1 °C.

The same button allows for setting the TIMER.

(8) TANK OVERFLOW INDICATOR

If the tank is full this led will turn on.

(9) WIFI INDICATOR

See the paragraph dedicated to the Wifi Guide.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Argo Loki Plus WF Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Argo Loki Plus WF

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info