Bedienungsanleitung Argo Newage (Seite 40 von 61) (Englisch)

805095

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

40V 11/22

3. SPEED BUTTON

Press this button, you can select the fan speed as follows:

Note: AUTO air speed is not available in FAN mode.

4. DISPLAY BUTTON

It is possible to turn the remote control display on or off, while the unit is running, to extend the life of the batteries.

5. iFEEL BUTTON

Pressing this button activates the IFeel function. The LCD screen shows the room temperature and when the function

is canceled it shows the set temperature. This function is not active in AUTO and FAN mode.

6. TIMER BUTTON

When the air conditioner is on, press this button to deactivate the TIMER function, or when it is off to activate it.

When the button is pressed, the display will show “ON (OFF)” ashing. It is possible to press the “ “ and “

“ buttons to set the timer, each press will increase or decrease the timer by 0.5 h up to 10 h, then the time

interval will be 1h. The settable range is 0.5-24 h. Press the “TIMER” button again to activate the function, the

“ON (OFF)” symbol will stop ashing. If the “TIMER” button is not pressed for 10 seconds while the “ON (OFF)”

symbol ashes on the display, the TIMER function will be canceled. If the TIMER function is active, pressing this

button will deactivate it.

Note: when the TIMER function is active, all function buttons (except SLEEP, DISPLAY and iFEEL) are usable.

7. HEALTH/iCLEAN BUTTON

This button has two functions:

• HEALTH: function not available.

• iCLEAN: When the remote control is off, press the “iClean” button to activate the “iClean” function with a

maximum duration of 30 minutes. The purpose of this function is to clean the evaporator from dust, dry the

water inside the evaporator and prevent the formation of mold which can cause the spread of bad odors.

After setting the “iClean” function, press the “iClean” button again to cancel the function or press the ON/

OFF button to cancel the “iClean” function and turn on the appliance. The “iClean” function is deactivated

after 30 minutes of operation if no operation takes place.

Note: the iClean function can be set in parallel with the “Timer on” function; in this case, the “Timer on”

function will be executed after the “iClean” function.

8. BUTTONS

Press the / button to adjust the temperature from 16 °C to 32 °C; the screen will change each time the

button is pressed. Each time you press “ “ the temperature will increase by 1 °C and each time you press “

“ the temperature will decrease by 1 °C.

Note: the temperature cannot be set in AUTO and FAN mode, so these two buttons will have no effect.

9. TURBO BUTTON

Press this button only in COOL or HEAT mode to select the TURBO function and set the maximum fan speed. When

TURBO mode is active, the fan is at maximum speed; When TURBO mode is off, the dispensing speed is restored

to the previous state.

10. MODE BUTTON

Press this button, you can select the running mode as follows:

Note: HEAT mode is not available for cool only units.

11. SLEEP BUTTON

When you press the SLEEP button, the display turns off.

After setting the Sleep mode, in the cooling function, the temperature will increase by 1 ºC in an hour, then

automatically increase by 1 ºC again after another hour. After setting the Sleep mode, in the heating function, the

temperature will decrease by 2 ºC after an hour, then automatically decrease by 2 ºC again after another hour.

After 10 hours of operation in SLEEP mode the air conditioner returns to the previous functions and automatically

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Argo Newage Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Argo Newage

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info