Bedienungsanleitung Argo Newage (Seite 44 von 61) (Englisch)

805095

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

44V 11/22

CONFIGURATION OF DEVICES

After downloading and installing the app on your smartphone or tablet, you need to add the air conditioner as your

new Wi-Fi device associated according to the following gure:

Note: if the device has not been connected properly, please run the conguration again as described above.

3. For rst time conguration or after the connected wireless router or access point is changed, make sure the mobile

device is already connected to the wireless router or access point to be paired with the WI-FI module.

4. If the conguration is failed, press “Cong faild check items” to check them notes about the failure before

recongure the AC.

After the conguration is successful, click the corresponding AC name to enter the control interface for further

operation.

1. Modify and Lock the Devices

• In the “Device List” interface, press and

hold for more than 0.5 second (for Android

system) or press (for IOS system) the icon of

an existing device to activate the “Modify

the name” interface.

• You can change the name or the icon, to

identify different AC devices.

• To lock a device, simply touch the “Locking

Device” icon. Once a device is locked,

other users won’t be able to search for it,

thus preventing it from hostile control. After

the congurations of the AC device names,

icons and locking status are complete,

touching “Save” will save and validate

them.

2. Delete an AC under control

For Android: Click “Delete Device” button under “Modify the name”

For IOS: Swipe over the AC name to the left under “Device List” and click “Delete”.

Reconnect the power to the system

and start the AC freedom application:

on the mobile device display

(smartphone, tablet) press “+ add

device”.

In the next screen select the type of device to

associate, that is, “conditioner”. On the next page

conrm the reset happened by checking the words

“I nished the previous step”: at that point press

“start”. Then look for the name of the wi network to

which you have to connect and type in the network

password. Then press “connect to wi-”: the system

searches the device to connect to the previously

selected “wi-”.

The air conditioner to associate will

appear on the nal screen. Press “air

conditioner” and conrm with “join

the room”. At this point the device is

connected and the virtual remote will

appear.

Device List

Add device Start the configuration

Add a new device to the WIFI network

WIFI name: XXXXX

password:

<<Config failed check items>>

Add device

Device List

Air-conditioner

Add device

Device List

Air-conditioner

Add device

Delete Device

Modify the name save

Photo

Name Air-conditioner

Locking Device

Firmware Upgrade

Fig.5

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Argo Newage Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Argo Newage

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info