Bedienungsanleitung Argo Polifemo Drip (Seite 6 von 9) (Englisch)

665658

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

V 12/16

ON/OFF：Press the ON/OFF button, the fan will start with nature wind mode, and fan function icon is lighten on the

screen at the same time, the wind speed display at 1. The Natural wind mode means that the fan will in the way of:

running 2 seconds and stopping for 3 seconds alternatively. Press this ON/OFF button again, all functions will shut off.

SPEED : Press this button, the wind speed will change to normal wind mode low speed, and the screen will display at 2.

Press the button the second time to medium speed and screen will display at 3. Press the button the third time, the wind

speed will change to high speed and display at 4. Press the button the forth time, the wind will stop and display at 0. The

wind speed will switch according to normal wind with display of 2-3-4-0 sequence when pressing this speed button every

time.

MIST：Press the MIST button to start the misting function, the misting icon will be lighten and the misting function starts

to work in mode 1: continuous misting.

Press it the second time, the mist will work in mode 2: mist for 3 minutes and stop for 5 minutes alternatively.

Press it the third time, the mist will work in mode 3: mist for 5 minutes and stop for 10 minutes alternatively.

Press it the forth time, the mist will stop and the misting icon will be off.

The misting function is separately from the fan function, so you could use it as humidifier.

ROTATE/CHILD LOCK：When the fan function is on, press the rotate button to rotate, the rotation icon will be lighten on

the screen. Press it one more time, the rotation will stop and the rotation function icon will be off. Please note that when

the fan function isn’t on, the rotation function cannot be used. Press this key for 3 seconds, to start the child lock function,

and press it again for 3 seconds to cancel the function. This child lock function can only be used when the fan function is

on.

TIMER +/-：When the fan or the misting function is on, press the Timer button for time setting. The screen will display H

icon and timer icon display at 1 hour, the timer icon it will switch according to “1 hour→2 hours→3

hours→……→9hours→timer off” sequence when pressing the timer button every time. This means that the fan or misting

function will be on until the time set and will cut off automatically. If without using the timer, you have to stop it manually.

Press this key for 3 seconds to turn off the screen light. But the other function is still on, this is an user friendly as well as

eco design because it saves energy and user can opt for illumination off at night time when sleeping. Press it again for 3

seconds to light up the screen.

REMOTE CONTROL

1. ON/OFF button

2. TIMER+ button

3. MIST button

4. SPEED button

5. TIMER- button

6. ROTATE button

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Argo Polifemo Drip Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Argo Polifemo Drip

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info