Bedienungsanleitung Argo Warm 9 (Seite 7 von 10) (Englisch)

805111

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

17V 06/23

HOW TO USE THE RADIATOR

HOW TO CLEAN THE RADIATOR

STORAGE OF RADIATOR

Choose a suitable place to position the radiator, considering the general safety warnings given in the rst part of this

manual. Only use this radiator in an upright position. Set all controls to OFF position, insert the plug into the electrical

socket, ensuring that voltage is compliant with that specied on the product data plate.

After placing the power selector knob in position 0, turn it clockwise to select the heating mode and power as follows:

1 (ECO) 800W for Warm 9 and 1000W for Warm 11 – 2 (COMFORT) 1200W for Warm 9 and 1500W for

Warm 11 –

3 (SUPER) 2000W for Warm 9 and 2500W for Warm 11.

Then turn the room thermostat knob to the maximum position. When the temperature in the room reaches the desired

one, slowly turn the thermostat knob anticlockwise until the pilot light goes off. If the room temperature drops below the

set temperature, the radiator will automatically reactivate to reach the set temperature, in this way the room temperature

will remain constant with energy saving. If you want to change the set temperature, turn the thermostat clockwise to

increase it, or counterclockwise to decrease it.

To switch off the radiator, turn the selector knob to 0 and remove the plug if you do not plan to use the product.

This radiator has an overheating protection system which allows the product to be switched off when some parts

become excessively hot. To turn off the radiator completely, return the power selector to the 0 position and then turn

the thermostat knob anticlockwise until you hear a click of total shutdown. Then pull the cord out of the socket if the

appliance is not to be used for a certain period of time.

This radiator has an anti-overturning protection system, which allows it to be switched off in the event of the product

accidentally overturning, or if it is excessively tilted. Then put the radiator back in the vertical position, to resume normal

operation.

• Always unplug and leave the radiator to cool before cleaning.

• Use a damp cloth to clean the radiator exterior and remove dust. Leave the casing to dry before using the

appliance again.

• Do not immerse the radiator into the water.

• Do not allow water to enter the radiator.

• Do not use benzene, solvents or abrasive compounds to clean the radiator, as these may damage the casing.

• Use a vacuum cleaner to remove dust from the air inlet/outlet grilles.

• Ensure that the radiator is dry before inserting the plug.

• Do not use metal tools to clean the appliance. Any metal fragments that may detach may come into contact with

the panel’s electrical components and cause a short-circuit.

• In the event of malfunctions or damages, always contact an authorised service centre.

If the radiator is not used for prolonged periods, it must be stored together with this manual in its original packaging, in

a cool and dry place. Never put the appliance away when still hot. Wind the power cord on the appropriate cable

winder. Always wait for it to cool down.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Argo Warm 9 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Argo Warm 9

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info