689096
9
Zoom out
Zoom in
Vorherige Seite
1/32
Nächste Seite
V 03/17
41
Press the ON/OFF button to turn the air conditioner on or off. When you turn on the air
conditioner, the power indicator on the indoor unit's display will illuminate (green).
The colour varies for different models. The indoor unit will emit a beep.
2-3. ▲/ ▼ button
Press "▲" or "▼" once to increase or decrease the set temperature by 1°C. Press and hold
"▲" or "▼" for 2 seconds to rapidly adjust the set temperature on the remote control. When
set-up is complete, release the button and the indoor unit's temperature indicator will change
accordingly. (The temperature cannot be adjusted in automatic mode).
When setting the TIMER ON, TIMER OFF or CLOCK, press "▲" or "▼" to adjust the time.
(Please refer to the relevant sections for the CLOCK, TIMER ON and TIMER OFF buttons).
4. MODE button
Press this button to select the desired operating mode.
AUTO AUTO
COOL COOL
DRY DRY
FAN FAN
HEAT HEAT
When you select automatic mode, the air conditioner will operate automatically according to the
factory settings. The set temperature cannot be adjusted and will not be displayed. Pressing the
"FAN" button will allow you to adjust the fan speed. Pressing the "SWING" button will allow you
to adjust the angle of airflow.
When you select cool mode, the air conditioner will run in cool mode. The indicator will
illuminate on the display. Press "▲" or "▼" to adjust the set temperature. Press the "FAN"
button to adjust the fan speed. Pressing the "SWING" button will allow you to adjust the angle of
airflow.
When you select dry mode, the air conditioner will run at low speed in dry mode. The
indicator will illuminate on the display. The fan speed cannot be adjusted in this mode. Pressing
the "SWING" button will allow you to adjust the angle of airflow.
When you select fan mode, the air conditioner will operate only the fan, blowing air without
cooling or heating. All the indicators will switch off. Press the "FAN" button to adjust the fan
speed. Pressing the "SWING" button will allow you to adjust the angle of airflow.
When you select heat mode, the air conditioner will run in heat mode. The
indicator will
illuminate on the display. Press "▲" or "▼" to adjust the set temperature. Press the "FAN"
button to adjust the fan speed. Pressing the "SWING" button will allow you to adjust the angle of
airflow.
N.B.:
To prevent blasts of cold air from being blown into the room, there will be a delay of 1 5
minutes after selecting heat mode before operation begins. (The actual delay will depend on
the indoor ambient temperature).
The temperature can be set between 16 30°C and four fan speeds are available: automatic,
low, medium and high.
5. FAN button
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Argo X3I 52HL wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info