Bedienungsanleitung Argo X3i Eco Plus (Seite 14 von 60) (Englisch)

805096

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

N.B.:

• may not be available. When the air conditioner receives this signal, the fan will start operating in

automatic mode.

SLEEP button

By pressing this button you can select Sleep 1 , Sleep 2 , Sleep 3 and cancel the Sleep function.

- SLEEP 1 works in cooling and dehumidification mode: after one hour of unit operation, the temperature will

increase by 1°C, after 2 hours it will increase by 2°C; in heating mode, after one hour of unit operation, the

temperature will decrease by 1°C and after two hours will decrease by 2°C.

- SLEEP 2 the air conditioning operates on the basis of pre-set temperature curves.

In cooling mode:

1. When the initial temperature is set to 16°C-23°C, after activating the Sleep function, the temperature will

increase by 1°C every hour, after three hours the temperature will stabilize, after 7 hours the temperature will

decrease by 1°C and the unit will start working constantly.

2. When the initial temperature is set to 24°C-27°C, after activating the Sleep function, the temperature will

increase by 1°C every hour, after two hours the temperature will stabilize, after 7 hours the temperature will

decrease by 1°C and the unit will start working constantly.

In heating mode:

1. When the initial temperature is set to 17°C-20°C, after activating the Sleep function, the temperature will

decrease by 1°C every hour, after one hour the temperature will decrease and the unit will maintain this constant

temperature.

2. When the initial temperature is set to 21°C-27°C, after activating the Sleep function, the temperature will

decrease by 1°C every hour, after two hours the temperature will decrease and the unit will maintain this

constant temperature.

3. When the initial temperature is set to 28°C-30°C, after activating the Sleep function, the temperature will

decrease by 1°C every hour, after three hours the temperature will decrease and the unit will maintain this

constant temperature.

- SLEEP 3: it is possible to customize the sleep curve: in this mode, keep the "TURBO" key pressed for a long

time to access the setting of the CUSTOM SLEEP function.

1. The remote control timer display shows "1 hr" and the set temperature indication "88" displays the

corresponding temperature of the last set sleep curve and flashes (the first data item is linked to the initial values

of the curve set in factory).

2. Press "▲" and "▼" to adjust the corresponding temperature. After adjustment, press the "TURBO" key to

confirm.

3. At this point, the time of the timer on the remote control increases automatically in steps of 1 (ie "2 hr" or "3

hr" ... or "8 hr"). The set temperature indication "88" displays the corresponding temperature of the last set

sleep curve and flashes.

4. Repeat steps (2) and (3) until the temperature setting is complete for 8 hours; at this point the sleep curve is

set correctly. When this operation is completed, the remote control resumes displaying the time of the initial

timer and the temperature displayed is the one initially set.

I FEEL function

Press this button to start the I FEEL function. The icon will appear on the remote control display. When you

select this function, the remote control will send the detected ambient temperature to the indoor unit, which will

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Argo X3i Eco Plus Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Argo X3i Eco Plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info