Bedienungsanleitung Argon 6355FS (Seite 1 von 2) (Englisch)

642239

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

www.argonaudio.com 1

Quick start

63xx series Quick start Guide

(Argon Audio 6340, 6350, 6344C, 6344FS and 6355FS)

We care about the Environment

By refraining from inserting a full printed manual with our

Argon Audio products we save more than 20 tons of paper

each year. You can find full product information for this

product on; www.argonaudio.com

Speaker positioning

The Speakers are best used with the tweeters

approximately at ear level when seated. Variations in

placement of your Speakers can produce dramatic

differences in the way music sounds. No listening rooms are

the same and therefore we encourage you to spend some

time experimenting with which placements work best in your

listening room. Trust your ears and be willing to experiment

freely. You can start with our basic recommendations.

Please try to ensure that the rooms surroundings of each

Speaker left and right are similar in acoustic character.

For example, if one Speaker is placed on bare walls while

the other is placed close to soft furniture’s and curtains,

both the overall sound quality and the stereo image are

likely to be compromised. Because bookshelves are usually

located close to the wall, placement on bookshelves will

often provide a richer, more full-bodied sound. In other

words; you will get more Bass. On the other hand, if you

place the Speakers free-standing You will get less Bass but

a clearer sound. To begin with, the Speakers should be

positioned between 1.5m and 3m apart at two corners of an

equilateral triangle completed by the listening area at the

third corner. See fig. 1

Home Theatre Systems

Argon Audio 63xx series speakers can be used as front

channels in a surround sound home theatre system.

Positioning the front Speakers within approximately 1metre

of the sides of your TV will create the best sound image in

scale with the visual image. The Speakers’ height should

ideally be between the centre and top of the screen. If the

Speakers are to be used for reproducing the surround

channels in a multi channel home theatre system, we

suggest you place them as illustrated in Figures 2 to 4

depending on the number of channels.

Connecting your loudspeakers

We recommend that you read the manual of your amplifier

or AV-receiver carefully before connecting your Speakers.

Please switch off all equipment when connecting your

Speakers. The binding posts on the terminal accepts wire

up to Ø 4mm or cables with banana plugs. Make sure that

positive terminal binding posts on the Speaker (marked +

and colored red) are connected to the positive output

terminal binding posts on the amplifier and that the negative

terminals on the Speaker (marked – and colored black) are

connected to the negative output terminal on the amplifier.

See fig 5.

You are now ready to enjoy your Argon Audio Speakers…!

Running-in period

We recommend a running-in time of your Argon Audio

Speakers of approximately 15-20 hours at normal listening

level before you decide on the final positioning of the

Speakers. During the running-in time the drive units will

settle in and perform as intended.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Argon 6355FS Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info