Bedienungsanleitung Argon Radio 3 (Seite 9 von 12) (Englisch)

755600

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

www.argonaudio.com

R a d i o 3

3. Reconnecting a device that has already been used with RADIO3 is simple. RADIO3

remembers your connected device(s).

o Notice: Bluetooth has to be turned “ON” on your phone!

o Press the Source (6) button on RADIO3 until the display shows “Bluetooth”.

o RADIO3 will automatically connect to the Bluetooth device that you have used

before with RADIO3.

o If more Bluetooth devices has been used and paired with RADIO3 before,

RADIO3 will connect to the Bluetooth device that is closest in range.

3.4.2 Operating Bluetooth on RADIO3

1. Volume can be adjusted both on RADIO3 and on the Phone

2. Press the 1/pause/play (1) button on RADIO3 front to pause or start playback after

pause.

3. Press the 2/skip track back (1) button on RADIO3 to skip track to previous track.

4. Press the 2/skip track forward (1) button on RADIO3 to skip track to next track.

4. Using Basic Functions

4.1 Storing and recalling your stations

Your radio can store up to 6 DAB and 6 FM radio stations as presets.

1. To store a station you are listening to, press and hold any one of button 1~6 number you

want to store the station in.

2. Hold until Preset x stored (Where x is anyone of the 1~6 number selected) appears in the

Display.

a. A new preset overrides an existing one when you store a new station over it.

3. To recall a station you press any one of the 1~6 number buttons, you will hear the

corresponding station that you stored with the corresponding number buttons.

4.2 Equalizer (EQ) setting

This function gives you the choice to optimize the sound to your specific needs. Ex. If you use

the RADIO3 mainly for talk-radio you will get optimal sound performance by choosing “Speech”

setting in EQ. EQ setting can be changed at any time.

1. Press EQ (4) button and it will show “Equalizer < Normal > (or the setting you have

chosen previously).

2. For changing the EQ setting, turn the Tuning/select (3) button/knob.

3. Each time you turn the Tuning/select (3) button/knob a new EQ setting will be displayed.

And the sound will change according to the EQ setting type.

4. There are six different preset EQ’s Normal, Classic, Jazz, Pop, Rock, Speech and one

adjustable preset – My EQ

5. Confirm your wished choice by pressing the Tuning/select (3) button/knob.

6. To set your own EQ press Tuning/select (3) button/knob, when “My EQ” is shown in the

display. You can adjust Treble and Bass levels to your own wish.

7. When Treble or Bass is shown in the display press the turn the Tuning/select (3)

button/knob to enter the setting then turn the Tuning/select (3) button/knob for +/- level.

8. When you reach your wished Treble or Bass level press the Tuning/select (3)

button/knob and your setting is saved.

9. To exit the EQ setting press Display (5) button

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Argon Radio 3 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Argon Radio 3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info