Bedienungsanleitung Ariston AD1600 (Seite 21 von 60) (Deutsch, Englisch, Holländisch, Französisch)

458996

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

- Instructions for installation and use

Settings

Press buttons and at the

same time for at least 4 seconds

to access the personalisation

menu, where you can choose

your language and the display

brightness.

The word “LANGUE”

(LANGUAGE) will appear; press

to display the language set. If

you want to change the language

set, just scroll along the

languages available by pressing

and confirm your selection by

pressing

To adjust the brightness of the

display, press both buttons

and at the same time for at

least 4 seconds: the word

“LANGUE” (LANGUAGE) will

come up; press

to display the

wording “LUMINOSITE ECRAN”

(DISPLAY BRIGHTNESS).

Press

to display the brightness

set; if you want to change it,

scroll along the three brightness

levels available with

and

select the desired one with

Special displays

After the first wash cycle..

The water hardness level is

displayed for 10 seconds, and you

can adjust the amount of

detergent you use accordingly:

Low

Medium

High

and subsequently:

No iron

Press to select the desired

function.

This option allows you to obtain

crease-free washing which is

easier to iron.

The appliance optimises the

washing conditions according to

the type of fabrics that are being

washed.

To select it, press

until the

word ON appears on the display.

In the Synthetics and

Delicates, programmes the

wash cycle is interrupted and the

washing is left to soak in water

before the appliance is drained.

To complete the cycle, press the

Start button.

The selection of this option is

indicated by symbol

appearing.

Note: this function is not

available with the Stain

Removal option.

Special programmes

Press to select the desired

function.

If you set this option, the

following options will be

displayed:



Special (OFF)



Rinse only



Spin cycle only



Drain

To select the desired "special

programme", press

, to

confirm your selection press

If you don't wish to select a

special programme, press

when the wording "Special"

(OFF) comes up on the display.

Class A at 40°C: Your has a special programme to obtain excellent wash results even at

low temperatures.

The results are the same as you would get with a 60°C wash, thanks to the washing machine's action and

to the increase in the duration of the wash.

To set this programme, place the mark situated on the knob completely to the left and set the temperature

to 40°C.

The wording "CLASS A" will appear on the display.

Daily: has a programme designed to wash lightly soiled garments in a short amount of

time.

You can wash different types of fabrics together (except for wool and silk), with a maximum load of 3 kg.

This programme allows you to save on both time and energy as it only lasts approximately 30 minutes.

WE RECOMMEND THE USE OF LIQUID DETERGENT.

To set this programme, turn the index situated on the knob to any position in the synthetics sector, select

a temperature of 30°C and select the Rapid option .

The wording "DAILY" will appear on the display.

Note: these programmes were designed to provide you with the best performance levels and therefore

cannot be modified; you may only reduce the spin cycle speed and delay the programme start.

Special wash programmes



the indication of the fabric

sector selected (COTTON,

COLOURS, SYNTHETICS,

DELICATES and WOOL)



the temperature corresponding

to the wash programme set



the recommended wash load:



after pressing Start, the

estimated duration of the cycle is

displayed; if you have set the

Delay timer

the countdown

to the wash programme start is

displayed.

During the wash cycle

The following are displayed:



the amount of time left



the temperature, during the

heating phase (on the scale on the

right-hand side of the display);

once heating is over and for the

entire duration of the cycle,

the weight of the load inside the

appliance:



the wash phases (pre-wash,

heating)



the options selected.

Door locked

Symbol on indicates that the

washing machine door is locked to

prevent it from being opened

accidentally. Wait for symbol

turn off before you open the

appliance door.

Error message

In the event of a fault, a message

is displayed, (e.g. F-01), which

should be communicated to the

Service Centre.

End of the programme

At the end of the programme, the

word END is displayed.

If you have used too large a dose

of detergent, symbol

lights

up.

This washing machine

nevertheless guarantees a perfect

rinse.

To look after your

garments, the appliance

may sometimes stop

with water in the tub,

leaving the wash to

soak.

Press to end the wash

cycle.

Demo Mode

The appliance is equipped with

a demo mode.

If the wording "DEMO MODE"

appears among the wording that

appears on the display, you

should disable it by following

these few simple steps:

- turn the appliance off at the

ON-OFF (C) button.

- keep Start/Reset (B) button

pressed and turn the appliance

back on at the same time.

From now on the demo mode is

no longer enabled.

HYDROSTOP

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ariston AD1600 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info