Bedienungsanleitung Ariston ALD10 (Seite 4 von 20) (Englisch)

47635

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

ARGHERITA

Margherita - Instructions for installation and use

Drying cycle lamp

When this lamp is on, it means

that knob B has been set on a

drying cycle and at the end of the

wash cycle, the appliance will run

the selected tumble drying cycle.

only to be used with wash

programmes for synthetic fabrics,

silk and curtains when it is

impossible for you to take the

washing out immediately. Before

opening the washing machine

door, finish the wash cycle as

follows:

Silk and curtains: press button D

and Margherita will drain the

water.

Synthetic fabrics: press button D

if you want a spin cycle, or turn

knob A to symbol

if you want

the water to be drained.

N.B.:

- when setting a drying cycle,

this function is not performed.

- with "Daily wash" or "Hand

wash", this function is not

performed.

Slow spin

Use this button to reduce the

spinning speed from 1000 to 500

rpm for the cotton programmes

and from 850 to 500 rpm for the

synthetic fabrics programmes.

On-off

When button F is pressed, the

washer-dryer is switched on,

when it is not the machine is

switched off. Turning the

appliance off does not cancel

the selected programme.

On-off lamp / door locked

Lamp G flashes slowly when the

appliance is switched on and

awaiting instructions and at the

end of a cycle, indicating that the

door can be opened. It flashes

quickly when the door should not

be opened. A steady light means

the appliance has accepted the

selected programme.

Here Im in command

Understanding the control panel

Making the right choice is important. And its easy.

Programme selector knob

and programmed start

Use this knob to select the wash

programme.

Turn this knob clockwise only.

To select a programme, you

should turn the knob so that the

symbol/number of the desired

programme is in line with the

pointer on the glass I.

Now press on/off button F

(position ON), pilot lamp G will

start flashing.

After 5", the setting will be

accepted, pilot lamp G will stop

flashing (staying lit) and the wash

cycle will begin.

Should you wish to interrupt the

programme in progress or set a

new one, select one of the

symbols

(Stop/Reset) and wait

5" : when the cancellation has

been accepted, pilot lamp G

flashes, and you can then turn the

appliance off.

You can use this knob to delay

the appliance's operation.

Select one of the 3 delay time

positions, press the on/off button

F (position ON) and wait 5". The

setting has now been accepted

(pilot lamp G stays lit) and you

can select the programme you

desire.

Pilot lamp G has a particular

flashing motion (2" on and 4"

off) to indicate that a delayed

start has been set.

During this phase, you can open

the appliance door and change

the washing load, should you

wish to do so.

After the wash cycle has been set

and accepted by the washer-

dryer, turning the knob will have

no effect (except for when it is

on position Stop/Reset).

Drying cycle knob

Use this knob to select the desired

drying cycle. Two options are

available:

A - Based on time:

From 40 minutes to 150.

B - Based on the damp level of

the dry clothes:

Iron

: slightly damp clothes,

easy to iron.

Wardrobe : dry clothes to put

away.

Extra dry : very dry clothes,

recommended for towelling and

bathrobes.

A cooling stage is foreseen at the

end of the drying cycle.

Detergent dispenser

It is divided into three compart-

ments:

1. Detergent for pre-washing;

2. Detergent for the wash cycle;

3. Fabric softeners, starches,

perfumes.

Rinse-hold

This button allows you to

interrupt a programme (on symbol

) keeping the washing soaking

in water before the spin cycle. It

is a very useful button in

particular because it can be used

for delicates and synthetics. It is

The detergent dispenser is here.

Margheritas knobs are hidden. Just

press them lightly in the middle to

extract them.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ariston ALD10 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info